Windows Forum

Ask something
Discussion Locked

About DNS and DHCP

0 helpful
3 replies

by ask_anurag

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I created a some zones in my DNS in w2k adv. server.And i want when my clients give request to access zones they will different IP through DHCP server.How i do it.Second on a single NIC card how many fake IP's i can assigned wht is the limit of it.Third is there any software for networking which shows u what ur clients are doing.If someone opens some web site then that information comes to server that this client opens this web site or he is doing this work.So that i know wht my clients are doing.
Regards.
Anurag.

3 replies

by antsoair

1. I am not sure about the limit of IP addresses but if you want 1 for one subnet and another for a different subnet then you should use two NICs.

2. If your clients are connected to different NICs then you can setup a DHCP scope for each subnet and the IP addresses will be allocated according to the NIC that receives the request. You can then setup routing between the two so that one subnet can talk to another

3. You can use a proxy server to track user activity. You can also use itto setup a simple firewall and it will cache web pages for faster access.

This discussion is closed to new replies.