Windows Forum

Ask something
Discussion Locked

About Proxy server

0 helpful
5 replies

by ask_anurag

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi,
I have windows 2000 adv. server and 10 windows 2000 prof. clients.I want to share internet through NAT.I am using dialup connection so i don't hv any static ip.I created demand dial interface and define a default static route.Now i want my clients can share internet.My clients are getting IP from my DHCP server.How i configure my clients to share internet and demand dial.
Anurag.

5 replies

by georgevlob

You might want to read "Connecting Your Network to the Internet" at:

http://www.microsoft.com/windows2000/techinfo/planning/incremental/connectnetwork.asp

It sounds like you have done most of the work. It also sounds like the only thing you are missing is to set up the router option on your DHCP scope. To set this go to Administrative Tools | DHCP. Under your DHCP server select the Scope, then Scope Options and right click on the options page and select Configure Options. Check 003 Routerand enter the name or the IP address of the computer you set up as your Router.

by cul8rm8e

since you only have a minimal amount of clients i suggest that you manually from each client set up a default gateway IP on each machine to that of the DC ie: 192.168.0.1

also go int properties of nat and allow for rounting on all routers, this makes life easy!

good luck.

rem that hthis is the case since you already have a DHCP server issuing address`s to your clients.

hope this helps.

your default static route should be IP- 0.0.0.0 with a netmask of 0.0.0.0

This discussion is closed to new replies.