General discussion

  • Creator
    Topic
  • #2093291

    accesss list on router

    Locked

    by raystep ·

    how can I denyb telnet traffic only on even number host and not on odd number host on a class b network address runnning ip and igrp protocol with a subnet mask od 255.255.255.192 ?must be extended access list. source ip 156.1.1.65 255.255.255.192 destination 156.1.149.130 255.255.255.192

All Comments

  • Author
    Replies
    • #3870113

      accesss list on router

      by calrion ·

      In reply to accesss list on router

      As far as I know, you can’t.

      Create 2 class-Cs or enter the IPs manually.

      • #3868988

        accesss list on router

        by raystep ·

        In reply to accesss list on router

        thanks for the try but maybe someone else can help

    • #3868969

      accesss list on router

      by Anonymous ·

      In reply to accesss list on router

      You can certainly deny/permit a specific range of addresses within a network, using the source mask, but manipulating this mask to only allow the even IP addresses in not possible. Maybe if you tell us the reason, there is another solution…

      • #3869455

        accesss list on router

        by raystep ·

        In reply to accesss list on router

        thanks but I have figured out how to do this the source address I gave is wrong it is 156.1.1.64 255.255.255.192 using the wild card mask of 0.0.0.254 will allow me to block only the even numbered host from telnetting to the other router by using this mask the last octet all the bits execpt the last bit will be ignored , if you convert the e ven number to binary you will see that they always end with a o this will match the even host numbers only

    • #3870543

      accesss list on router

      by netwill ·

      In reply to accesss list on router

      enter the ones you wanted to be able to access. The rest will be denied.

      • #3868614

        accesss list on router

        by raystep ·

        In reply to accesss list on router

        too long of an access list all I had to do was use the wild card mask of 0.0.0.254 and this did what I needed to do

    • #3868613

      accesss list on router

      by raystep ·

      In reply to accesss list on router

      This question was closed by the author

Viewing 3 reply threads