Discussion Locked

AGP, IDE, and SCSI errors

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a Windows 98 machine with AMD k6-2 500, 196Mb of RAM, Acer CD-RW 10x4x32 drive, CD-Blaster 52x CD-Rom, 3gb WD HDD, Stealth III Savage 4 Pro+ AGP card.

I think that there is an error with the AGP miniport driver, and the driver for the savage card itself. When they are both installed I get the Blue screen of death. I have tried to reinstall drivers, install updated drivers, reseat the card, etc. Any ideas whats going on with that?

Other problem I am having is with CD-Rom, CD-RW drive, or the software for the CD-RW(Adaptec EZ CD creator, DirectCD). Blue screen of death reads SCSIPORT error, and PCID error. Exact error messages i didn't write down. I renamed SCSI.PDR in windows/system/iosubsys. That got ride of the error, but my cdrom and rw dont boot up when windows starts. There are no SCSI devices in my computer, all IDE.

7 replies

by pc-tech

I'm glad you posted your processor information. I have seen problems with the AMD K6-2 (350 and higher) in the past. I have found a patch for these at the Microsoft support pages.
It turns out that there is a slight timming descrepancy between AMD K6-2 and Windows.
I have posted two file on my web site for you.
(*note-read the HTML document first as the patch was made for Win95, - and backup all system files that you can, just incase.)
I have seen this patch fix a number of problems, andI have seen it make things worse - I give no guarentees.
You can find it at:
http://www.efni.com/~carsten/amd
Good Luck!

by theq

Thanks I have already tried that patch, but Windows 98 comes back with a "This patch is for Windows 95 only" message, and boots me out of the patch program. I am thinking that 98 is recognizing my IDE devices as SCSI devices, hence the SCSI.PDR file, but I am not sure. any other ideas on it?

by cdobbin

I don't think your PC is detecting IDE devices as SCSI, I can't really say I have seen this problem before but here's what I would try. If the devices appear in device manager but not windows explorer, I would delete the devices and restart windows to see if it will auto detect them, if that does'nt do it I would run through the windows setup again. As far as the video problem,well I really don't have any answers on that one other than try another video card, if you are using a VIA chipset mainboard, maybe try installing the 4 in 1 drivers.

by theq

...last time I buy a computer fair mobo... even a name brand one. Multiple reinstalls havent helped, the motherboard I have is an Asus board. It uses the Ali Aladin chipset, i have already tried to download their last drivers for the AGP port, but that didn't help.

by theq

Your answer gave me some insight as to what to look for. Although everything i have done hasn't worked.... completely. I tried the updated drivers for my chipset and finagled it into working with my video card drivers(dont ask how!!). I haven't been able to run any 3d games in fullscreen. I hope it isn't my video card, no mulla even for a cheapy card.

I solved the IDE problem by slaving my CD-Rom off my 3Gb, and my CD-RW as a master. Thanks for the help, your answers helped the most.

This discussion is closed to new replies.