Hardware

General discussion

Gravatar
Locked

another HP problem

By panget ·
I am experiencing problems w/ my printer. I have a deskjet670c and the cartridge cradle is stuck in the middle of the slide bar (or whatever you call it). It's making this awful crunching sound as the cradle is trying to go back to its original position but it just won't go back. Also, I'm having trouble turning it on and off. Somehow, 1 push on the power button is not enough to power it on or off. I have to press it continuously before it powers on/off. Any suggestions?

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
+ Follow this Discussion ·
| Thread display: Collapse - | Expand +

All Comments

gravatar
Collapse -

another HP problem

by Fossil In reply to another HP problem

THis HP link sounds just like your problem:
HP Deskjet and HP Deskwriter 600 Series Printers - Paper Will Not Load, Grinding Noise, or Carriage Stall
http://www.hp.com/cposupport/printers/support_doc/bpd04237.html
read it thorough and follow the directions.

gravatar
Collapse -

another HP problem

by panget In reply to another HP problem

Poster rated this answer

gravatar
Collapse -

another HP problem

by 1stladytech In reply to another HP problem

There is a small slide on the left side of the printer, which cams the gears to load paper. This tends to jump up and get jammed in the printer, especially after use. Just pull it to the right and pop it back down into place. This will fix the printer for the short term, but it will probably jam again. HP will not send the part, so I just keep unjamming mine. The carriage in the middle also indicates that it wants new carts or there is a problem with the carts.

Good luck

Vickie

gravatar
Collapse -

another HP problem

by panget In reply to another HP problem
gravatar
Collapse -

another HP problem

by panget In reply to another HP problem

This question was closed by the author

Back to Hardware Forum
5 total posts (Page 1 of 1)  

Start or search

Related Forums