Question Locked

Anyone got any ideas on installing SP3 to a Toshiba Tecra A3?

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've just run the setup Disc twice to be told that I don't have permission to install this to a Admin Account on a standard Tecra.

The system returns to the Restore Point that was created when I first attempted to install SP3 for XP. It has XP Pro SP2 loaded and nothing otter than the Factory Installed Software so I'm at a bit of a loss currently.

Of course the customer handing me the NB at 8.30 PM and saying it's a [b]Simple Little Job you can deliver it back first thing tomorrow.[b] didn't help but after all it's only applying SP3 to this thing supposedly.

Col

4 replies

by Former member

To prepare for your installation of Service Pack 3

1. Start your computer and log on as an administrator. Administrators have complete and unrestricted access to the operating system and its settings. You can either log on with the user name Administrator, or use another account that is set up as a member of the Administrator group. To determine which group a user is set up for, click Start, click Control Panel, and then open User Accounts.
2. If your computer is running on battery power, plug it in so that your computer does not lose power during the installation.
3. If you use Fast User Switching, make sure all other users are logged off. For more information, see "Fast User Switching" in Help and Support Center.
4. We recommend that you perform a full backup of the files that you keep on your computer to an external location, such as an external hard disk, DVD, CD, USB flash drive, or network folder. You can use the Backup and Restore Wizard to back up documents, pictures, and other files. For more information, see "Backing up files and folders" in Help and Support Center.
5. If your computer is running Windows XP Professional, we recommend that you create an Automated System Recovery (ASR) set before you begin the installation. This helps repair your setup if the installation fails. For more information, see "To create an Automated System Recovery set using Backup" and "To recover from a system failure using Automated System Recovery" in Help and Support Center. (If your computer is running Windows XP Home Edition, ignore this step; ASR is not available for Windows XP Home Edition.)
6. Close all open programs.
7. Proceed with the installation, as described in the following section.

Important

* If the configuration of your antivirus software prevents certain system files from being changed, SP3 installation might fail. Try temporarily disabling your antivirus software. You can usually do this by right-clicking your antivirus program icon (which typically appears in the bottom right-hand corner of the computer screen) and clicking Disable.
* If you disable your antivirus software before you install the service pack, be sure that you are aware of the risks involved, and be sure to enable it after the service pack is installed.

Installing Service Pack 3

You can install SP3 either from the Service Pack 3 CD or from the Windows XP Service Pack 3 website. The website provides a link to Windows Update, where you can install SP3.

To install Service Pack 3

1. If you install SP3 from the Service Pack 3 CD, the Welcome to Windows XP Service Pack 3 window should automatically open when you insert the product CD. If this window does not appear, click Start, click Run, type Drive:\Autorun.exe (where Drive: is the drive letter associated with your CD-ROM drive), and then press ENTER.

If you obtain SP3 from the website, to install immediately, click Open or Run and follow the instructions on your screen. To install the program later, click Save and download the installation file to your computer. When you are ready to install the service pack, double-click the file.
2. On the Welcome to Windows XP Service Pack 3 window, click Continue.
3. Follow the instructions that appear on your screen.
4. After the installation is complete, click Finish to restart your computer.
5. If you disabled your antivirus software, enable it again.

Removing Service Pack 3

You can use Add or Remove Programs to remove SP3 and restore your computer to its previous state.

To remove Service Pack 3 by using Add or Remove Programs

1. Click Start, and then click Control Panel.
2. Click Add or Remove Programs, click Windows XP Service Pack 3, and then click Remove.
3. Follow the instructions that appear on your screen.

Important

* If you choose to remove SP3, a dialog box displays a list of the programs that you installed after you installed SP3. If you continue with the removal, these programs might not work correctly.
http://technet.microsoft.com/en-us/windowsxp/cc164204.aspx

Please post back if you have any more problems or questions.

by hal 9000

Can't remove what doesn't install but I do love the warning messages after the system returns to the Restore Point that the System may not work. Very comforting that and I'm supposing the reason that it was given to me. :0

Seems to be a Registry setting that is affecting HP AMD units as they seem to be the only ones affected according to M$ at least.

What threw me was this is a Toshiba with a Celeron CPU so that shouldn't have applied but looks as if it does in this case at least. According to M$ this is caused by creating a Slipstreamed Install CD on a Intel CPU and deploying it to a AMD Unit something about CPU settings causing a difference.

OH well I'll make them wait and talk to Toshiba tomorrow to see if they have any other solution that may be easier after all I'm lazy and I have no excuse for it. :D

All I can currently say now is [b]OH Smeg It all[/b] I'm going to bed for the time being and finally getting some sleep. :0

For anyone interested this may be of some help

http://support.microsoft.com/kb/943144

and the official description maybe?

[i]Most computers include an image that the manufacturer created by using the System Preparation (Sysprep) tool. Sysprep lets the computer manufacturer generate an image that can be used on different computers. The problem that is described in the "Symptoms" section may occur if the original Windows XP Service Pack 1 (SP1) Sysprep image is created on an Intel-processor-based computer and if the Sysprep image is then deployed on a non-Intel-processor-based computer. Under this configuration, after the computer is upgraded to Windows XP SP2 or SP3, the Intel processor driver (Intelppm.sys) may try to load because an orphaned registry key remains from the original Sysprep image.[/i]

Col

by hal 9000

You need to run the M$ recommended

[i]Method 3: Reset the registry and the file permissions
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/) How to back up and restore the registry in Windows
Important This method is intended for advanced computer users. If you are not comfortable with advanced workarounds, you might want to ask someone for help, or you might want to contact Microsoft Customer Support Services. To contact Microsoft Customer Support Services, visit the following Microsoft Web site:
http://support.microsoft.com/contactus/ (http://support.microsoft.com/contactus/)
1. Download and then install the Subinacl.exe file. To do this, visit the following Microsoft Web site:
http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en (http://www.microsoft.com/downloads/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b&displaylang=en)
2. Start Notepad.
3. Copy and then paste the following text into Notepad.
cd /d "%ProgramFiles%\Windows Resource Kits\Tools"
subinacl /subkeyreg HKEY_LOCAL_MACHINE /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CURRENT_USER /grant=administrators=f /grant=system=f
subinacl /subkeyreg HKEY_CLASSES_ROOT /grant=administrators=f /grant=system=f
subinacl /subdirectories %SystemDrive% /grant=administrators=f /grant=system=f
subinacl /subdirectories %windir%\*.* /grant=administrators=f /grant=system=f
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
Microsoft provides programming examples for illustration only, without warranty either expressed or implied. This includes, but is not limited to, the implied warranties of merchantability or fitness for a particular purpose. This article assumes that you are familiar with the programming language that is being demonstrated and with the tools that are used to create and to debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure. However, they will not modify these examples to provide added functionality or construct procedures to meet your specific requirements.
4. Save this Notepad file as Reset.cmd.
5. Double-click the Reset.cmd file to run the script.

Note This script file may take a long time to run. Additionally, you have to run this script as an administrator.
6. Install Windows XP SP3.[/i]

Not pretty but effective as it works even if it isn't supposed to happen with a Toshiba Computer with a Intel CPU. :D

Col

This discussion is closed to new replies.