Join or sign in Register for your free TechRepublic membership or if you are already a member, sign in using your preferred method below. Use Your Email Use FacebookUse Linkedin

ArcserveIT 6.6 + Netware 4.11 Sp9

Locked

HI everybody!
Im experiencing slow backups performance (1,5 KBPS). CAI support fails to help me!!!!
Current hardware: Compaq ML370 + Adaptec 7940UW + Compaq TL891 libtary (dlt 35/70)
Any advice on how to speed this process will help me!!!

Topic

ArcserveIT 6.6 + Netware 4.11 Sp9

In reply to ArcserveIT 6.6 + Netware 4.11 Sp9

I have found a very simply an not well documented parameter in arcserve that does really a good job.
Have to edit your asconfig.ini and in the same line where arserve attemps to load the driver for the ADAPTEC board, at the end of the line type
USEABOVE 16
This forces the adapter to use memory above 16MB in order to get faster access.
My backuptimes were reduced up to 50%.

Hope it helps!!!

ArcserveIT 6.6 + Netware 4.11 Sp9

In reply to ArcserveIT 6.6 + Netware 4.11 Sp9

It was awesome!!! Thank’s

ArcserveIT 6.6 + Netware 4.11 Sp9

In reply to ArcserveIT 6.6 + Netware 4.11 Sp9

This question was closed by the author

[Author]

Replies