Question Locked

ATI All-In-Wonder X800 Video Card problem with HDTV

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone had a problem with the catalyst control center which is connected to an HDTV by component video showing the video only in black and white on the screen. Another sign is that the component subtitle in the control center is not available and shows the TV as a standard TV. If you have encountered this and was able to fix The problem please let me know, I have been working with ATI for over a month without any success. I have a fresh copy of windows media center 2005 with all updates and a brand new component cable running to my Mitsubishi Diamond Scan HDTV.

5 replies

by oh smeg

Recently had a DVD player only showing in B&W on a HDTV Screen.

In that case it was the TV which was at fault as it worked correctly when feed a signal from any other source. The Input side of things on that TV was shot. It only affected that type of Input though and worked perfectly on any other input type.

As for the New Lead have you actually tested it to make sure that it actually works? I know of several new things which are either incorrectly labeled or are faulty so it's not enough to have something new you need to test it so you know that it actually works.

Col

by capecodkid906

I tried my HD DVD player on the component port that the computer is using and the picture is perfect. Now, there are 3 devices with this setup. 1 - dongle from computer to the ATI component cable. 2 - ATI component transition cable running from dongle to the YPbPr component cable (brand new), 3 - YPbPr cable to TV. I tried the YPbPr with the HD DVD player and it works fine. I am wondering if it could be the power supply; being rated at only 180W?

by oh smeg

Most likely as those cards are POWER HUNGRY and if it's running in a Under Voltage or Current, System anything is possible.

I personally prefer decent Power Supplies like the Antech ones as I've seen one get destroyed by a severe over voltage event and the computer wasn't hurt in the slightest a new PS and it worked for the next 3 years without missing a beat.

I've seen some cheap Power Supplies go slightly Bad and destroy all the internals of the computer and when these where replaced by the unsuspecting it then proceeded to destroy another M'Board CPU and so on.

Col

by jamesrl

I have an x850XT, which is a little more powerful than the x800. It would not run on with a 350 watt PSU, if I was playing games or other things that cause the PSU to run at the limits. It would overheat and the ATI software would shut down the system.

James

This discussion is closed to new replies.