Question

Locked

Barracuda LB setup issue

By vwsportruck ·
Hi All,

I've been tasked with installing a Barracuda 640 Load Balancer to balance two app servers. This will have a public internet address (we have the reserved IP already)that should NAT to a DMZ IP, will go through our Cisco Pix515 Firewall (already configured) and will reside in our DMZ, and the servers are within our private IP network.

My issue seems to be with assigning the WAN ip to the DMZ and being able to access it. When I give the Barracuda a DMZ address and save, it times out and I can't see it through the web interface. I need to be able to see it so I can then setup the service that will create the virtual IP in the same subnet as the WAN port for the real servers.

Thanks,

-=Mark

This conversation is currently closed to new comments.

0 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Networks Forum
0 total posts (Page 1 of 1)  

Related Discussions

Related Forums