General discussion

Locked

BGP routing information

By bowieb ·
We have two T1 lines from different ISPs for redundancy. Each line goes to its own router(Cisco 3640s). I have been given the job of implementing BGP on the routers. I am familiar with basic router configuration, but I know very little about BGP at this point.

Can anyone point me to some simple examples and how-to documents? Everything I have found so far mainly deals with the advanced options. I just want something that will show the basic configuration that I need to get it working sothat both routers can advertise routes into our network.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

BGP routing information

by Gee Santoz In reply to BGP routing information

I hope this will help :

http://www.cisco.com/warp/public/459/27.html

Basically you have to manage your traffic so that your network will not be a transit network for the two ISP you connected to.

Collapse -

BGP routing information

by bowieb In reply to BGP routing information

Poster rated this answer

Collapse -

BGP routing information

by bowieb In reply to BGP routing information

This question was closed by the author

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums