General discussion

Locked

Boot problem

By fabriciolush ·
my PC doesn't boot.
when it's perform the Post process
I can get this beeps : 5-2-2-1
I thing is a memory problem but when I start the PC without RAM a get a differnt beep :
1-2-3
Need your assistance in this issue.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Beep Beep

by Tecnico Computer Services In reply to Boot problem

I could not find anything on the 5-2-2-1 code but here is what I found on the 1-2-3
=DMA read/write failure The DMA controller has failed. Replace the IC if possible

Good Luck

Collapse -

Couldn't find anything on 5-2-2-1?

by NickNielsen In reply to Beep Beep

Where did you look? I searched Google for "Beep Code 5-2-2-1" and came up with 80 hits.

Collapse -

5 2 2 1

by mjd420nova In reply to Boot problem

Lets see, that's a failure of the memory and I'll bet the first beep was a long one. This usually indicates that the first 64kb of memory is bad and the CPU can't even load the BIOS. Does this motherboard have integrated video?? That could also be where the failure is if it's not integrated.

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums