Brain Studies... the difficulty of hearing women
This is page 2 of the discussion. Read the opening post
Community archive
This is page 2 of the discussion. Read the opening post
And then it's back to the nine-to-five...
You're planning to sail the Atlantic and I'm hoping that the sea won't be too rough for a trip round the pier on Monday.
Well, nothing really...
:D
by sleepin'dawg
In Canada we have our Thanksgiving Day which we celebrate on the second Monday of October. The Americans,on the other hand, celebrate their Thanksgiving on the fourth Thursday of November. For them it's a really big event, possibly exceeding Christmas, in terms of importance to family unity and values. If nothing else, it quite often means a 4 day long weekend for them.
In Canada it hasn't reached that level of importance just yet but seems to be moving in that direction, as Canada mirrors a lot of American traditions. In some parts of Canada, November 11th, Rememberance Day is also a holiday but it still hasn't been given official status. Stores and companies stay open but banks and government offices close.
Now go wash some test tubes or whatever. :^O I'll hoist one in your honour while out on the briny. I've got to get as much sailing in as possible before it gets colder than a witch's mammary.
Are you still cruising, with your binoculars, off the topless beaches at Brighton??? Or is it Bath??? Are the oldies still goodies??? LOL ;)
[b]Dawg[/b] ]:)
I was hoping to get it this weekend but there's been a hold-up. The main feature is [b]zoom[/b] but I'll have to wait until next summer now as all of the birds will have their winter plumage after this weekend unless we get a major Indian Summer.
Anyway, this weekend is the kids' day out and my Godson (12) won't go within a mile of [b]that[/b] beach after a severe case of nudy-shock in the early summer.
We're done with holidays. They're trying to start up a combination of St.George's Day and Thanksgiving for a new holiday to replace Mayday. After reading a bit about the Pilgrim Fathers, we should be thankful and celebrate that we got rid!
Neil :D
I will not let my jealousy get the better of me...
by dmambo
by sleepin'dawg
The Canon S2 is. It's a 5 megapixel camera with a 12:1 zoom. It's truly a marvelous little gem which yield the results of the 35mm equivalent of 37.5mm to over 430mm. The optics are top notch the only drawback is that it only saves in JPEG but that isn't really too serious a limitation. The image stabilization feature is invaluble at the longer focal lengths. I'm not used to shooting at 430mm handheld but at ISO 50 I might need a monopod under low light conditions. Take a look, you won't be sorry. The only accesories I added were a 1 Gigabyte SD card instead of the 16megabyte that comes with the camera and some rechargable batteries. I also bought a wide angle adapter but so far haven't needed it. It beats the hell out of lugging all my lenses and SLRs around. Now if they'd only start manufacturing professional digital video cameras. I know they do but have you seen the prices.
Check the stats on the S2is http://www.dpreview.com/
[b]Dawg[/b] ]:)
but ended up with a Panasonic DMC-FZ5B 5.0 megapixel camera with 12x optical zoom and added a 1GB card so pretty much the same spec.
They didn't have a special on the Canon and I got a case and 128MB card free with the Pamasonic.
Thanks for the suggestion
Neil :D
by hal 9000
Now if you want a real camera you can not go past a Hasselblad one of the medium format ones at least with those you can get some decent enlargements without turning the piece of paper into a series of blotches that can only be seen from half a room away.
Incidentally they make a marvelous 1,200 mm Telephoto Lens.
Col ]:)
I wander round and about with my little auto-focus 35mm and click, click and thn I thought "Lets go digital".
There's always some purist who'll tell you what you really need.
I think that you should trade the Ducati in for a second hand Honda CX500, known as the "plastic maggot" in the UK. You'll have much less chance of killing yourself.
:)
by sleepin'dawg
I was actually considering it particularly because of its Elmarit lens. It's hard to turn your back on Leitz optics; same for Zeiss and Schneider optics but over the years I've learned that the Japanese produce extremely competitive and optically comparable optics. What led me to the choice of the Canon was a side by side comparison of the two cameras and the fact that the Canon was over $100 cheaper here in Canada.
Canon has a new processor in their camera, derived from their SLR line and the Canon yielded marginally better resolution across its focal range. Also throw in the fact that Canon loaned me four cameras to test and Panasonic only loaned me one and you will understand my choice. One of the Canons finished on top and that was the one I chose to keep. You have to understand also that just about anything I buy from Canon and Nikon is, because of my position in the industry, in effect life time warrantied, short of my throwing their products out a window, which from time to time I've been tempted to do. As for Col's suggestion of Hasselblad's, ask him to check out the prices on the H1 and H2. Sticker shock for those suckers will be sure to knock his socks off if nothing else does. As with most things in life you can't compare apples to oranges and a good big CCD will beat the crap out of a good little CCD. I am the proud, or perhaps stupid, possessor of 12 of thes 'Blads plus the personal owner of 4 'Blads of the film variety but if he really demands to see absolutely fabulous results he'll have to harness up the digital backs for either a 4"X5" or an 8"X10" Sinar, the costs of which I hate contemplating, even now. BTW while I've now gone digital for over 99% of my professional requirements, I still use film because there is nothing in existence as yet, to match its resolution, latitude, predictability and sharpness and this is especially true when working at ISO speeds in excess of 100. When I'm traveling on assignment; its not unusual for me to pay $200, sometimes even more, for the excess baggage weight of my equipment. When traveling for pleasure, I would still lug along more equipment than I needed.
Twenty or some years ago, Olympus came out with their OM series of SLR cameras and I was approached to try them out and endorse them. They offered to give me a complete system to match my Nikon and/or Canon equipment as well as pay me. At the time I was in the process of switching to Canon from Nikon, both which I love by the way and I wasn't really too interested. However, they did have a small amateur camera, the Olypus XA, which intrigued me, since the whole thing including flash could be carried in a shirt pocket. It had auto-exposure and was a focusable camera as oposed to the usual zone focusing of most amateur equipment. Olympus has an excellent range of lenses which take a backseat to nothing. When they first came on the market after the war their cameras were 1/2 frame 35mm and they were competing head to head with Nikons, Canons, Leicas and Contaxes. You have to have very good optics if you want to compete in that league and Olypus optics were very, very good indeed. Proof of that is that I still use my Olympus XA and it has backed up my bigger stuff more than once and it will still be carried as my backup of choice.
On assignment in the Arctic my Nikons froze solid. These were cameras that had been specially winterized for the assignment but even that wasn't sufficient in -40F degree temperatures with an accompanying wind chill of -110F. The tolerances on the Nikons were just too tight. I was photographing polar bears and while I could get off one shot the second would jam the camera. The tolerances on amateur equipment are not so precise, so out came my little Olympus, totally unwinterized, and I completed the job, without further ado. I should tell Col about the fun you can have trying to keep 'Blads operational in the Sahara and Gobi deserts. Again the Olympus came through.
Another reason I chose the Canon over the Panasonic is that it's a bit lighter and seemed to fit [b]my[/b] hands better, a very subjective thing. Also, while Panasonic has a track record in amateur video it has little or no track record in still photography, something Canon has in a great deal. Something else you should consider, is that I shoot more in a day than even the most ardent amateur shoots in a month so the ergonomics of any camera that I hold in my not too grubby little mitts is fairly important to me. I worked for almost fifteen years with Nikons and finally switched to Canons for that reason alone. It's a very personal thing but when I started out Canon didn't have the equivalent products for professionals. It took a lot of consideration for me to make the switch to Canon since I was heavily invested in Nikon equipment. It wasn't an easy decision; both systems are great but at the time I made the decision Canon was introducing its line of fluorite optics and that motivated me to take the plunge. Thats the way its been for me ever since but quite a few of my people use Nikon equipment.
BTW now that you've gone digital you'll have to get over the economic psychological hump of preserving film. You can see your results immediately and delete what you don't want. It wasn't a big problem for me as most of my cameras are motor driven and it meant nothing to me to burn film while bracketing exposures. The more you shoot, the better photographer you'll become. Here's hoping you have lots of fun and oh yes, break down and by a copy of Photoshop.
Whether it's professional or amateur, it's supposed to be fun and it beats the hell out of golf, no matter what way you look at it. I've been in photography since I was eight years old first as an amateur and then professionally. I first received money for a shot when I was 9 years old.
One other thing, [b]my[/b] choice of Canon, is exactly that and shouldn't be taken as criticism of Panasonic, which is your camera of choice. Remember, I was about to buy the Panasonic when the S2 came out. I wanted the Panasonic in preference to the Canon S1 and almost bought it and there are still certain things about it I like, especially that Leitz lens. Now we can expect to hear from Col on the supposed superiority of Zeiss optics. Look at it this way, you've got the best of both worlds; an excellent Japanese camera with just about the best of German optics. What more could you ask for??? :D Have fun.
[b]Dawg[/b] ]:)
by hal 9000
Professional Photographer, who originally specialized in B&W images and then was forced into doing weddings which promptly stopped when he found someone throwing up in his camera bag. While that was bad enough they then in a drunken attempt to stand up kicked the bag down a flight of steps. It was bad enough that all his equipment was covered in vomit but to see the contents bouncing out of his bag which was a big Aluminum case with 5 Blad bodies several different lenses and God only knows how many backs made him put his foot down. He then started doing double & triple exposures. I have a great picture of a plastic helicopter landing on a womans breast which is only a 30 X 40 inch print so I can't scan it in and e-mail you a copy.
Those where the smallest prints that he was doing when he died but I can assure you that the Blads are a fairly sturdy camera as he had one sitting on the back deck of his car when it was parked and some drunken Yuba came around a corner way too fast and hit the stationary car head on and drove it back through a brick fence. Unfortunately he had just picked up the body from a service and the force of the impact flung it through the front screen then straight through the screens on the other car and onto the road. When it was found it worked perfectly and other than a bit of glass embedded in the case and a few scratches in the body you couldn't even tell what had happened. Of course his insurance paid for a new one and since they didn't want to damaged one back he kept that and added it to his collection after removing the glass. :D
As for that Honda idea you're welcome to it personally I think I'd be far more likely to die sooner riding a 500 Honda around as they are so slow but it might prevent some traffic offense notices arriving. Although I've been good latterly as I haven't received a single speeding ticket in the last 20 years {that have stuck} I did get 3 a few years ago within a 3 month period but one of those was after a Technical Write-off and it wasn't my bike or me, or so but all that means is that the cops have been in the wrong places when I've been out riding. :p
Col ]:)
by hal 9000
The mention of the 1,200 mm Blad Telephoto Lens should have been a dead give away. Most people spend far less on their houses than what that single lens costs. :)
I inherited a couple of 500 ELM Blad bodies and assorted lens when he died and I've been known to use 50 ISO film to take close ups of flowers with Diopters installed no depth of field but nice sharp images of what I want to show.
But one of the best was at a weeding where he had taken his film out of the freezer and in a hurry to leave had left the film on a table so we raided every chemist shop open in the general area buying film any C120 that they had. At one of the places the woman behind the counter offered my brother $50.00 for his collectors camera as no camera today used C120 Film and she would know as she was a Professional Photographer. ;) Anyway when he pulled a Blad body and back out of a bag she nearly wet herself. He used to use different film meaning brands for different jobs like the Fuji of that time was far better at the slower speeds than the Kodak ever was. I do have one digital back for the Blad bodies but don't use it all that often as those cameras are more for real photos and not the ones used for "Happy Snaps" that most people use and I've yet to find anywhere that can use a digital format to enlarge to a decent size even a 30 X 40 inch print is beyond the current digital ability and the bigger ones are just way to hard to achieve. But for little happy snaps I do use a Sony DSC 73 mainly because it was given to me and I'm way to tight to shell out for one and I have a couple of Pentax Bodies for small film projects. Mostly today I only use the Blads for fast film and capturing motor racing stills I've yet to come across anything better.
But you'll love this one I was a guest at a weeding and took along one of the Blads for a few of my own pictures and the official photographer was getting really miffed until I told him I was only taking a couple of shots for myself apparently he thought that they had hired a couple of photographers and where going to play them off against each other of course it didn't help that I had better equipment that what he had and he couldn't believe that I wasn't involved in the profession. :p
But what I was trying to get at in the above is that you can sit on your boat way off shore and with a Blad and a 1,200 mm Telephoto and get some very interesting images and no one is any the wiser. :^O
Col ]:)
by sleepin'dawg
devices can yield billboard sized images. If you are speaking in straight photographic terms of prints via normal enlargement i.e: a Besler or a Simmonds yielding prints on photgraphic paper you are correct. However, pros shoot for reproduction and the 14-16 megapixel renderings from a Nikon or Canon are more than sufficient to render a billboard sized image at 180-280 DPI. The Devices in Hasselblads while being similar to the smaller devices render images even larger and that is nothing to a device for recording images on a 4"X5" or larger camera. Note: I am talking of recording images not taking photographs. For instance there is not a monitor in existence which can display the full extent of even a 3 megapixel image. Do not confuse pixels with reproduction DPIs and understand not all pixels are created equal; there are huge differences between a pixel on a 2/3" CCD and one on a 1" or larger CMOS sensor. You need to look at something called optical density and the dynamic range of the larger devices. More details per pixel are generated on the larger devices. Also greater ISO speeds on the larger sensors create less "noise"(chromatic aberation) than on the smaller receptors. The larger the receptor is the greater and more precise the information each pixel can carry, yielding greater depths of tonality and gradation. BTW the sensor on the H2 'Blad is larger than 35mm format measuring 37mmX49mm and yielding 22 megapixels while the sensor on the Canon EOS 1Ds yields 16.6 megapixels. Most ink-jet printers print in the 2800-5700 DPI range and that's "enhanced or optimized" resolution. Go into a professional print shop and look at the 36", 48", 60" and even 72" wide ink-jet type printers knocking out images at 280-330 DPI and tell me again how limited in reproduction size digital cameras are limited to. Back in the not so old days I was knocking out 4'X8'(yes that's feet) from 4"X5" negatives which were then stitched/spliced together to form a 16'X24' photograph which was put on display on the Grand Concourse of New York City's Grand Central Station for 15-18 months. That little item took over 120 hours of labor to produce and required 5 photolab technicians; that's a total of 1000 man hours and does not include the studio and/or location time to take the image.
Nowadays I could do the whole job inside of a week using one man to make 3 6'X16' ink-jet prints which could then be stitched/spliced together to make that same photo. There are supposed to be even larger ink-jet printers available but I haven't seen one yet and I doubt there would be enough call for it to justify the cost or ROI. It's hard enough to keep the ones I have now, running at 1/3 capacity (an 8hr shift). I shudder to think what the pay back time would be on those monsters. I could do a bit of math that would prove my point but all my specs for it are in my office and I'm ready for the sack. If I can remember to and have the time for it, I'll post it. BTW a 6'X16' at 240 DPI takes from 6-9 hours to produce and requires at least one reload of the ink tanks of which there are eight. Seeing as how I only bought these things but have hardly ever driven them, I'm not exactly up to speed on their operational details. I'm sure the tech guys could tell you,in detail how to do the whole job faster than I've described. BTW if you take a look at the image quality of a high quality magazine, such as National Geographic Magazine you are looking at 330 DPI 4 color process and the whole magazine is standardized on 35mm. Get the picture???
Oh yeah about the 1200mm 'Blad lens; when I first went professional I went equipment crazy too but after you put yourself up to your ears in debt and have to pledge your right nut and your first born for security, you learn to back off and only buy equipment for which you can justify the cost. Unless you are generating enough work to justify the expenditure, you can rent the equipment. In my case it wasn't lenses; I was nuts for studio strobes and the faster the better. The people at Ascorlite, Thomas/Balcar and Broncolor must have loved me back then as much as my studio wienies hate me now. This equipment is [b]old[/b] now but still fully functional. Flashtubes and modeling lights come and go but power packs are forever. My Ascorlites are truly ancient, bordering on antique but they still recycle fast enough to keep up with a 5fps motordrive. Mind, you could get a hernia trying to lift one. The Broncolors are not so hefty and my Thomas units are still pretty much state of the art being not much bigger than your average gadget bag and still able to handle 4 heads each. When I finally came down to earth as regards equipment purchasing, I figured there were other idiots out there, like me and like me they would learn the error of their ways or go broke, so I took to haunting the bankruptcy auctions of those that did go broke and acquired enough equipment to open a side line business of equipment rentals. It took off and within 3 months was in the black and after 23 years has yet to show a loss in any quarter. Now I'm even renting out professional cine and video equipment such as 70mm Macbeths and Arriflexes and my equipment addiction now more than pays for itself. When the boys in Hollywood go on location they often under estimate their equipment requirements and there we are, to the rescue. We rent equipment all over the place both in Canada and the US and occasionaly offshore to Europe and other locales. Its cheaper to rent from me than to amortize costs on equipment which may sit idle for long periods of time between productions.
With the heavy useage being it was, it wasn't long before we had to start doing our own service and repairs to keep our equipment available and online for our customers. Recognizing the synergy, it was a small step to opening another sideline business in equipment repair.
These days, while photography, video and cinematography remain my first loves, they comprise less than 15% of the profit picture. We have a business doing color separations for the printing business. We produce process film for the silkscreen business and the printed circuit board business. We, of course have a silkscreen facility and we have a small prototype printed circuit board operation. We've limited ourselves to prototype boards rather than production boards as it was a niche that nobody was operating in at the time. We limit ourselves normally to runs of 25 boards or less but will do the occasional job up to 500 boards. It's nothing for Lucent, Nortel, HP or Dell to order runs of 2000-10,000 production boards at a time but in development when they only require a prototype or two they come to us because we can turn them around in a much shorter time. Almost an in by 9 out by 5 sort of operation. Of course when we do work for aerospace firms like Hughes and Boeing for their satellite divisions there are only a few satellites ordered so most of the boards produced for them are production as well as prototypes.
So far you will note that all of these businesses evolved out of the synergy of photography and photomechanical work. I opened professional photo processing labs in Boston, New York and two years ago in Chicago and we purchased two more labs in Philedelphia and Baltimore. We've picked up work for our other businesses from these locations as well. One of our operations is producing TV commercials and instructional films and videos. The instructional videos and films were first and that led us into computer animated graphics. It was a short jump to producing computer animated special effects for commercials. Two of my people have worked for George Lucas. That led to shooting the whole commercials. Back at the instructional film business I was looking over story boards and scripts and this led me to wondering who wrote the instruction books so stretching the synergy envelope a bit, we opened a technical writing department, converting scripts into books for a varied assortment of small to medium sized businesses, that can't justify maintaining their own technical writing departments.
Its all about recognizing niches and filling them. This whole house of cards grew out of five guys with complimentary skills getting laid off in March 1988. We didn't have anything to lose by joining forces and using our networks of contacts to grow the business. We stuck our necks out a few times on some calculated risks but on the whole got to where we are by minimizing costs and maximizing profits. We even play the market, buying shares in some of our clients. We were a one shift operation until July 1st, 2004 but it always niggled me to think of machinery sitting idle 16 hours a day so we went to a two shift operation. Our venture was confirmed by a 93% increase in net profits and a 167% increase of gross profits. The best decision we have ever made was our expansion into the US. I doubt we would have achieved a quarter as much if we had remained based solely in Canada. Canada seems to be in the business of government regulations; Americans on the other hand are in the business of doing business. Sure there are regulations in the states but Americans will help you in meeting the regulations while in Canada getting information on regulatory matter is the equivalent of drawing teeth from a chicken. Just when you think you've met all the regs some pissant bureaucrat will blindside you with another one. Americans want you to succeed and their bureaucrats go out of their way to make sure you're informed and you hardly ever get taken by surprise.
This has gotten a long way away from digiital photography and its all your fault Col, you dirty old barsteward. If you hadn't rattled the bars of my cage I would have been asleep by now, you cheeky bugger, so you owe me one and next time I'm down under I'll look you up to collect. :^O
[b]Dawg[/b] ]:)
by hal 9000
Places like National Geographic only use low density DPI rates and "Corporate Color" as apposed to the big Photo Labs who can produce one print that doesn't run when wet like the top of the line Photographic ink jets do.
But more to the point here at least currently there are not the originations available to do this type of work. On the other hand I can get quite a few different places to produce large prints fairly quickly and cheaply without requiring the expensive in house equipment.
I'm sure that the big Graphics places have the ability to do this work but they are few and far between where as the old film is an easy option is cheap has better than Corporate Color and is generally much easier to use for the large prints that my brother quite often used. Even the latest equipment that places like Pro-Lab have here are still very rudimentary in comparison to their film ability to work with. No doubt Digital will be the way of the future but currently it isn't here yet and like the "Paperless Office" I think it will be a long time coming. The cost of even the better Digital Photo printers is horrendous and the consumables are even worse.
But that is just my observations of the Digital Imaging side of things currently even the irks used are only claimed to be color fast for 25 - 30 years and Kodak have constantly insisted that burning images to CD/DVD is only safe for 4 - 5 years before they start to degrade. So while it is the way things will eventually go we are still just at the beginning of the cycle and it will be a very long time before I consider throwing out my Film cameras in favor of a digital replacement. Even the Blads Digital Back is poor in comparison to the same body/lens combination and a roll of film. It would be excellent for Magazine/Newspaper work but not very good for long term photos that will be kept for generations. But then on the other hand I have spent days restoring an old photo and then saved it to a digital format and printed it out on a Cannon cd 300 photographic printer which is the most I can afford for something that is very rarely used. "The things that I do for my mother. :^O"
Col ]:)
by sleepin'dawg
I purchased their model Stylus Photo 2200 for $495 CDN and I'll bet the price is even lower now. It has 7 ink tanks, has a maximum resolution of 2880X720, uses Epson UltraChrome archival inks and will produce prints up to 13"X44". Now ask yourself this, how often have you required a print larger than 8"X10" or 8 1/2"X11" in fact how often have you needed a print larger than 4"X6". I'd bet that if you were really honest with yourself, the answer would be that 95% of the time you require nothing larger than 4"X6". BTW these archival inks are supposed to be good for 75 years or more. Think you'll be around to tell if they aren't??? The 2200 was their top of the line at the time and is still available. I saw one in Office Depot about a week ago. I didn't check the price but I know they have a newer model out now so it wouldn't surprise me if it were at least $100 less than what I paid for mine.
Other models are limited to 8 1/2" wide paper and my son bought an R200 model for $149 with a $50 rebate coupon. It has 6 ink tanks. If I hadn't needed a printer capable of 11"X17" prints I could have saved myself a chunk of money. The inks are the same as on the 2200 model.
[b]Dawg[/b] ]:)
by hal 9000
But I was sort of turned off the Epson Printer range when they released the Stylus 740 which was supposed to be a photo quality printer. At the time it was the first of the series and was the top of the range with 1400 DPI resolution I think but maybe it was 2800 DPI.
I could get 1 A4 page per set of ink tanks which was very expensive to print per page. Of course my Mother who wants everything as big as possible only wants A4 sized prints now so I bought the Canon which is a lot cheaper to use but is still expensive but I get more than a single page out of a set of Ink Tanks so it's far more useful to me. Being a border-less printer it's works out much better as well. But honestly I very rarely print off pictures for myself now days and even when I do I just settle for a 6 ink tank Canon i965 which is good enough for my miserable needs as they are all throw away items for the kids or someone like that.
I've even started using a Samsung color Laser printer for some as it's even cheaper and though it is only Corporate Color everyone seems happy with the results even if I'm not and would never consider using it for myself. But it does run off excellent product books as I've done quite a few of them on it.
I can just see it now another printer in this place would have certain parts of my anonymity cut off with a blunt knife. It's OK having over 20 computers but "She Who Must Be Obeyed" has drawn the line in the sand at 10 printers so unless I can sneak one in while she's out for something that I don't really need but perhaps I can get one of her friends to ask for something special and that way I can get what I want without a problem. :D
But lately I have been trying to keep all the printers fairly standard so I have fewer consumables needed on hand as I'm constantly spending vast sums of money on the disposables even the Photo Quality paper seems cheap in comparison. If I can get Ink Jet cartridges for under $500.00 AU I think I'm doing well and of course the color Laser costs far more even with the cheapest toners which I can buy new wholesale from the supplier than refilled toner cartridges. For the straight Ink Jets which are just run of the mill I have the tanks refilled but the Photo ones are all new tanks and I do use lots of them. It's not uncommon for me to have to place an order for what I need and then have to wait a few days until they get stock for the Lasers I always have at least 1 set of toners on hand and for the straight Ink Jets 3 sets of Tanks then there is the cd300 which I always have at least 6 sets of tanks available and what's worse is I'm giving most of those consumables away. :(
Of course the fact that my mother is into Family History and attempting to bankrupt her eldest son doesn't help in the slightest. The best one was a DVD of pictures that she got and wanted 10 copies of each on A4 paper she had no idea of just how many pictures can be fitted on a Recorded DVD. What worries me is that when she finally completes the job she'll want me to print off booklets of the finished work. I think I'll be packing up the mobile home and going for a short holiday before that happens like 25 years touring AU should just about be long enough. :^O
GOD are you trying to get me killed? I've just looked up the Epson Web Site and fell in love with the STYLUS PHOTO R2400 particularly as it is an A3 with the ability to handle rolls of paper. There is absolutely no way I could sneak one of those in here! If "She Who Must Be Obeyed" wasn't asleep I wouldn't even dare look up that site just in case she walked past. Now I've got to remove any trace of my Internet usage just in case she looks up the history of my browsing.
Col ]:)
by sleepin'dawg
when I started to look at printers for my home I ended up with a bout of sticker shock, when it came to color lasers. The printers themselves were cheap enough but the toner costs were a real kick in the head. Every color laser requires 4, count 'em, 4 toner cartridges and regardless of make the prices for these run between $149-$189. Black toner is usually the largest cartridge; the color toners being somewhat smaller. Black is lower in cost than the colors, more towards the low end of the scale, with the colors on the high end. The cost of the printers was actually quite inexpensive ranging in price between $359-$529; Its on the toner where they nail you. With one exception all printers ship with only partially filled cartridges 1000-1500 pages of black for an "average" text filled page and 750-1000 pages of color for pages with 20-25% color graphics. You are lucky in one sense because Samsung lasers were/are shipped with full cartriges. Remember my data is from December 04. Prices on the printers could be even lower now but I'll bet there's been no reduction on toner costs.
My final solution was to purchase a B&W Samsung laser model ML-1740 for 600 DPI text. I paid $189 CDN with a $50 rebate coupon. Toner costs for this is $95 for a 6000 page cartridge. I do my text output on this and then pass it through the inkjet if I need any color graphics or photos in the final output. I only print one copy of everything and if multiples are required I take them to the office where I can run multiples through our Xerox mono or color lasers for a much lower per page cost.
In your case I would suggest taking any need for multiple copies to any of your customers who have color copiers. They probably won't even notice you doing it and a sure way of getting away with it is to take it as a file on a disc rather than a paper copy. That way you can claim you are checking printer and copier connectivity and sharing capabilities. Don't run off a 100 copies in one place, spread it across several customers and that way you will have a much lower risk of exposure. ;\ Just don't show up in my office to try it on. How do you think I know about this trick??? It was the Xerox tech we caught doing this and we wouldn't have noticed except he output 3 pages of 100 copies each. If he had stuck to 15-25 pages we probably wouldn't have ever noticed. We never reported him because (a)He was a nice guy and a great tech and (b) we learned something from the experience and have since kept a tighter rein on what passes through our printers and copiers and lastly (c) he apologized and offered to pay for the supplies he had consumed. We waved that and I'll bet since then he hasn't even cadged a pencil or a paper clip.
I keep my costs low by getting ink in bulk from Epson and refilling my ink tanks but I use standard Samsung cartridges which I get a bit of a price break on because they give you a small credit when you return your empty cartridges. I could use refilled cartridges but my experience with those has been troublesome. If we use the manufacturers authorized toners we have much less down time. In the end the savings you get by having a cartridge refilled doesn't warrant the down time and additional sevice calls. On my inkjets it's a different story. I'm refilling my tanks with real Epson inks which we get from them but not everyone has my connections and so I really have no idea how or if you can buy bulk Epson inks retail.
{b]Dawg[/b] ]:)
by hal 9000
And bought a Samsung CLP-500 the color toners cost me around $114.00 AU and the black one is a bit less for the 6,000 page ones the refilled ones are about $20.00 more expensive so it's a No Contest issue there.
As far as the ink jets go for the run of the mill ones I refill the tanks except for the Epson 740 which is not refillable and I do use the genuine Inks from the makers. I've loaned the Epson out so I'm not constantly feeding the thing but with the Canon i965 & cd 300 I always use new ink tanks as I can not afford to run the risk of trashing a print head they are just a bit expensive. ;)
Things have got a little better now with the Color Laser copies as I've picked up a little trick for the Canon Image Runners on a Service Contract I turn off the counters for diagnostic work and run off as many copies as required so other than the electricity the company involved isn't paying for anything as the Toner and servicing is covered in the costs on a Per Copy Basis. One of the Canon Techs put me onto this one and showed me how to do it.
But the real problem is still my mother and kids to a lesser extent as they just drop me a whole swag of things to print off and then expect them immediately now with text even with some color it's no big deal but the photos are a different story and as my daughter is getting back today from a round the world trip where "She Who Must Be Obeyed" handed her my Sony with a 1 GIG card in it I'm betting that there will be a few photos to run off. Although I can put several on a page and just run them off as required or what I think is a cheaper alternative is buy her a printer something like the Canon i 3000 which is only a little over $100.00 AU to me and give it to her and let her experience the benefits of printing off all of her photos. Of course it's only a Corporate Color Printer but it does have individual ink tanks so it will not kill her overly. :D
I could get one of those for far less than 2 of the toners for the Samsung and while the Wife wouldn't understand it would be much cheaper for me. God I shouldn't have looked at the Samsung as it's telling me it wants another black toner fitted seems that every time I look at the thing I'm fitting a new toner and I really do not use it that much I have a Canon LBP 1760 for Black laser work and I'm kicking myself for not getting a duplexer for it when I had the chance as it would reduce the amount of paper that I go through dramatically and would have well and truly paid for itself several time over by now. Perhaps I'll get lucky and find one on E-Bay for either the Canon or a HP 4000 as they are both the same unit just with different badges on them.
But really between my Mother and my Wife I'm between a rock and a hard place as "She Who Must Be Obeyed" always says to anyone who asks which is always my mother or one of her friends "No Worries Col Will Do It Straight Away!" For any of the people who I agree to run off something for they wait until I get to a photocopier with a RJ45 interface and run off whatever there with the counter turned off as I put a lot of those into my customers places with the really good Service Agreement that Canon offers over here there isn't much of a problem and I've only ever had a problem with one of them which of course had to be one that I got for an organization that my Mother is involved in, it broke in a big way just 2,000 copies into a big run for their regular publication so I had to pull the old one out of mothballs and push it back into service until the new one was fixed. But what I do is organize a massive amount of paper and at least 10 Color toners and 15 Black Toners to be delivered with the unit so they are never short of consumables. You should have seen one that I organized for a customer it was one of the big ones with a cutter built in and they just had to have the thing even though the floor would not have supported its weight so we had to build another room onto the place just for the Photocopier come printer and with big enough doors to get a fork lift in to bring in the finisher the actual copier was fairly light and easy to move around but the bit that fitted on the end was a different story what a monster of a thing it is. But that unit holds 6000 A3 sheets in the bulk feeder and then has another 6 draws which only hold a ream each in it they mostly have A4 paper in them except for one drawer which was A3 Card. It's really quite a nice unit and so far has been bullet proof. They just keep feeding it paper and toner and cleaning out the off cuts and it just goes on and on personally I think it's overkill for what they need but it does do a nice job.
Col ]:)
by gadgetgirl
jck - now, look, don't go telling everyone how long my important bit is! And just how did you know it was .0005 of an inch? You got that web cam on me again.....??? :D And I promise, right here and now, that I won't hit you with anything at all. I mean it. Nothing at all.
Only me ]:)
(woo hoo!)
Dawg - Personally, I don't have anything against Glasgow...I was purely thinking of your well being and safety. It's a bit rough up there, but your "clan" should have already warned you about that! Hmm. Must do some research and see if we're enemies from years back - we border reivers have one heck of a reputation for making enemies...!!
Your list regarding my perversions - well, I can only say one thing........WHEN CAN WE START?? ;\
I'm getting increasingly curious as to where your nickname comes from. C'mon, tell me. I won't tell anyone else, honest! Just leave it on the board here....
There, left nice big space for explanation....
- and my total is running, because I seem to collect nicknames like other people collect passwords.....and I wouldn't dare put most of them anywhere near this board! (ok, so I live in the gutter, and work there too, I'm used to it)
Gotta ask how come you have such a short working day....how come you got that so right and I got it so wrong?!
oh, and your camera discussion. I don't care what you and Col think, I'm exceedingly happy with my Trust mini digital. Fits into the handbag, takes great photos, has half a gig SD card, and goes with me everywhere (and also takes evidence photos for work, which means I don't have to learn the fads and foibles of a different camera every time!!!) Can't for the life of me think of the model number, and it's not handy at the mo.....But it's a nice gadget for a gadgetgirl to have... :D
along with the superduper lappie, the wheely bag, the ipaq and keyboard, the other ipaq with TomTom on, the reversing bits on the new (to me) car...
ok - any gadgets I'm missing in my life? ]:)
And I'm not talking vibs again, we've already done that one.....;\
(there's a challenge for you!)
GG
by jck
Any poking done by a woman should only be done by a finger...or...perhaps a hardened nipple with an unplanned flinch. :O
ok...so...there...I maintain my title of swill with the breast comment...should I add in something else that might poke my eye at some point???? ]:) ( I might get an email soon...hahah...)
by sleepin'dawg
you're the signer of the cheques. Of course, it helps when you possess the souls of your staff. Hyahahahaahaha!!!(with reverb; think Gene Simmonds on speed but without his requirment for the makeup) ]:) ;) ;\
Glasgow??? What's wrong with Glasgow??? I've had many a good time there. I even know how to respond to the classic Glasgow "Good morning". (the trick is you have to give your "greeting" first.) With a nickname like mine and even in my advanced state of decrepitude, do you really think there are any places I can't go, when I decide to take my strolls on the "wild side". B-) ;\ The trick here, is never look like a victim and never hesitate. Always look like you know where you're going and what you're doing even if you haven't the faintest idea. You can always fake it. As I said previously, how many people do you know who would even think of falling asleep in the midst of a Celtic-Rangers game thus pissing off both sides. To this very day, my cousin still talks about it. Soccer isn't really my bag and I went strictly out of politeness as it seemed so important to my cousin. I was jet-lagged beyond belief, operating under serious sleep deprevation, so of course, try as I might, I couldn't maintain any facade, polite or otherwise, of interest and thus, nodded off. I am most definitely not the happiest of campers when forcibly awakened and my cousin says he almost had a heart attack when I cocked one eye open at some noisy jeering idiot and inquired, quite politely I might add, "Excuse me but what is this strange urge you have to experience insufferable pain???" I further added, "Now if you don't mind, I'm trying to sleep here." Whereupon I closed my eyes only to the point where I was looking through my eyelashes. When the idiot laid his hand on me, it was only natural that I come quickly to my feet and offer him the traditional Glasgow "Good morning". The others, seeing as how I was aware of the local greeting customs, must have taken me for a local and decided to leave me alone and go back to watching their precious game. I, of course, resumed my nap.
I relate this incident, not out of any sense of pride in being able to inflict mayhem, when I so choose but in acknowledgement that sometimes things just happen and that I am [b]always[/b] aware of the potential possibility of trouble. Friends will tell you of the many times they have tried to sneak up on me and surprise me, only to be thwarted by my calm response of "Oh, Hi there" before they can spring the surprise. They may actually have surprised me but I hate to lose control and I force myself to stay calm. I hate losing control but I've learned over the years (many), that things I do or say, when out of control and letting emotions take over, usually end in trouble and/or problems. There have been times, when presented with some sort of troublesome situation, my loss of control would have only exacerbated the problem. My reaction to most problems is usually, "Okay, there's a problem. Let's everyone calm down and fix the problem and we can worry about assigning blame later. Ranting and raving won't solve anything, so lets get on with it."
This sort of reaction used to infuriate my wife and she'd say, "Don't you ever feel anything???" Of course I did but I can/could never see how letting go emotionally, would ever solve or fix anything. Still can't, for that matter. There have been instances where I must have advertently or inadvertently ticked someone off and they have threatened me with some form of violence. My reaction is to stay calm, lock eyes with the individual and say, very calmly, "Oh, are you absolutely sure that's something you want to do???" or perhaps you might say, with a smile,"Now why would you want to go and do that???" I try to keep it light and humorous; humor can divert so much but I still stay aware. I might be seething inside but I'll never let anyone see that. My calm, quiet and somewhat humorous responses, normally diverts most trouble.
Nickname hints: The adage says, let sleeping dogs lie. Now ask yourself, why would they say that??? LOL ;)
It is good to be assertive but keep a firm grip on being overly aggressive. There may be times and places for it but never, ever, while being emotional and out of control. If you absolutely must be aggressive, stay in control of it.
You don't have to be the biggest dog or the toughest; just the meanest.
Never get mad; get even.
To illustrate: Find a small dog and give it a nice meaty bone to chew on. Wait ten minutes for it to get comfortable with it and then see what happens when you try to remove the bone. Make sure you do this with a small dog; a big one might take your arm off. Point made???
Know how to get into Dodge but make sure you know the way out of Dodge.
Make of [b]that[/b] what you will. Bottom line is: Never let them see you sweat and never be the first to blink. Nyahahahahahahaha. B-)
Understand this is all metaphor but it does convey the idea.
Hundreds of years ago someone, I think it was Omar Khayyam in The Rubaiyat, wrote, "A loaf of bread, a jug of wine and thou, my love". He was writing metaphorically. Today he might write, "Booze, nooky and a nosh for later." Loses something in the translation, doesn't it??? ;)
Later,
[b]Dawg[/b] ]:)
by sleepin'dawg
in spelling words like neighbour, colour or humour with a "u"??? Don't you find the "u" superfluous??? And while I'm at it, why spell it light when lite is much more economical of letters. Just wondering but sometimes the logic of spelling the traditional way, escapes me.
[b]Dawg[/b] ]:)
by gadgetgirl
Also the cheque signer, but in a microcompany, so still suffering the 27 hour days....
I say again, there is nothing wrong with Glasgow. I didn't know at the time that you'd been there before, and were more than well aware of the Glasgow Kiss.
Having been born with the security gene implanted at the forefront of the brain, I don't blame you for being ready for anything. I am. The proof of that being that I once slapped the ex - hard - across the face in a bar. All I felt was someone kiss me on the cheek, hadn't seen who it was, so just let rip....he had a wonderful shiner which lasted for about a week, and didn't do it ever again. Oh, sorry, forgot to state that I'm not that strong - arthritis in both hands and wrists - but I did have a full bottle of booze in my hand at the time....
and I also diffused that one with some humour. Considering the size difference between us, and the colour of the shiner, it wasn't hard for anyone to see the funny side. They all know I'm the eternal optimist anyway, so they were eager to laugh with me.
Humour is my best option, as I have one helluva temper. Think Hulk in anger mode, but not green, just small and very red. You wouldn't like me when I'm angry :D . Unfortunately have one of those totally-lose-it/act-first-think-later/kill-mode type of explosive tempers. Go ballistic. Don't often get violent (no point, too small, too weak in the arms) but lets just say space invading and very succinct, usually very loud words.
So you'll be pleased to know that I've only totally left the planet like that once in the past 26 years. And annoyed myself immensely by doing so, but someone messed with my family. And you don't wanna do that. Lifted a guy by the neck with one hand four inches off the floor, and kept him there, whilst holding him against an open window, for about six minutes...no, I have no idea how, and boy, did I pay for it. Couldn't write or type for 10 days! But if it makes you feel any safer, that was nearly three years ago now, and I haven't come anywhere close to that since.... (must be mellowing)
Which explains nickname no. 2 - Pocket Rocket!
(or does it. those who follow my posts may think otherwise, considering I usually end up in the gutter...well, hmm. Leave you to wonder...)
So now you got 2 outta the 9 or so. And I still intermittently answer to them all!
Got the sleeping dog connection ages ago, obviously, but usually you let sleeping dogs lie so as not to dig up old arguements. Or re-open old wounds. So that really wasn't much help. Unless you're as explosive as me, in which case you'd better bypass the Tyne or there'd be a nuclear event!! :D
Booze, nooky, and a nosh afterwards? You inviting me on your boat again, Dawg? ]:) :8}
Or you may just have got the spelling wrong....
http://www.rogerdecourcey.co.uk/
:^O
GG
by sleepin'dawg
worse but I think it's great. Now you've got another mystery: What are the three S's or esses??? Gotcha!!!
BTW you still haven't got the name thing yet. Sleepin' dawg is only my TR alias and only gives a passing reference to my nickname. You've got to think outside the box. :^O Brush up on your french and remember [i]"je ne sais quois"[/i] ;\
Geez, maybe that's to blatant a hint???
So you come from a line of border reivers??? Those guys used to go in for rape, pillage and plunder. Rape is no longer PC but would you be up for a spot of pillaging??? Oops that's probably not PC either but I'd probaly be a willing victim.
The Tyne you say??? Will I have to look out for midgets that try to board me??? It's okay with me, especially if they have a decent bottle of whatever clenched in their teeth. BTW once my little tub is 100 yards offshore, it becomes clothing optional. How's that for a little roll in your gutter??? The arthritis must be a b]tch but since I'm an old fart it probably will slow you down enough so I can keep up. ;\ ;) Anyway the Tyne isn't too far off my route, so who knows, maybe I will "knock you up" as you raunchy little Brits might say. BTW "knock you up" has a slightly different connotation on this side of the pond, not that I'm suggesting anything. ;) :^O
If you decide to throw a leg over, my bulwarks that is, damn, got to remember that, it's hard remembering all those British aphorisms but you know what I mean, don't you??? ;) Anyway you take it, you'd be more than welcome.
BTW the gutter doesn't bother me in the least, since, as you might have noticed, I set up residence there ages ago. I love double entendres and word play. Hell, I just plain love play. Work hard, then play hard. Party hearty is the ticket as far as I'm concerned.
[b]Dawg[/b] ]:)
by jck
Sleep
Sauce (booze)
Spank-o-vision (guess what that is...)
hahahaha ]:)
by sleepin'dawg
And we call booze sauce too. :^O
Geez, all this time I thought I was the only one crazy enough to be online at this time of the morning. Still, I think I'll wait a while before requesting my membership in the swill club but if and when I do I just hope The King of Swill will recommend me. BTW is it socially acceptable for swill to add Guinness to their cereal instead of milk and would you perhaps know how it would taste or should I skip the cereal and just go with the Guinness???
[b]Dawg[/b] ]:)
by gadgetgirl
by the Vassal!
meeting now - will be hard to concentrate on it, due to the fact that my brain is in overdrive on the 3 S's. Usually means sun sand and sex, but knowing Dawg...
oh, & btw, le chien, il aime la reverse?
jck - you ok? how's the area after Katrina?
keep safe :x
GG
by sleepin'dawg
J'aime beaucoup une petite fille qu'elle avais une vrais appreciation des trois modes. Now if that doesn't set everyone to looking through their French :x -English dictionaries, nothing will. Are you sure that's how you spell vassal??? B-)
Maintenant, je pense que nous avons entre, dans une vrais joues des mots; n'est ce pas??? ;)
Who loves ya??? :x
[b]Dawg[/b] ]:)
by jck
gadgetgirl - je ne parle pas francais...merci. now besides that...um...sun...sand...got all that I could want here in FL. Sex? what's that? :D hahahah
dawg -
First of all...you should NEVER put Guinness in cereal...why ruin the taste of a perfectly good Guinness!!!!!
Honestly tho, Guinness adds iron to the diet, so it is especially good for women with a low iron count. Plus, it has minerals and stuff too.
Second...to be in my elite swill society, you have to pass a course of rigorous tests and interviews. It's not as easy to be swill as it is to be in Bush's cabinet :D
Third...you envision me and spank-o-vision? are you sick? I don't even like thinking about it. But, I guess tigers don't like thinking about eating raw antelope...but, the result is so good to them. That's why I don't think about it...I just do it. :D hahahah
Finally...you would not need my recommendation... you need King Swill's approval!!! :D As I said, you have to pass the tests. My first suggestions...a) stop thinking about me and my spank-o-vision...b) drink more Guinness...c) make friends with people at IMG, cause I need someone on the inside there to meet my would-be wife....]:) (now the guessing game begins)
OK...King Swill has spoken!!! Rise all ye who would be swilled! ]:)
by jck
wee wee wee (I know it's oui...)
I'm gonna start talkin in Cherokee Indian, if you guys don't stop talkin in French...then you'll have to get Wilma Mankiller to translate for you!!!!
Better yet, maybe I should talk in Vogon...only Doug Adams could translate that! :D
by gadgetgirl
You reached the limit of my french....!! ;\
However, I shall just state that...
I AM MORE THAN ENOUGH ON MY OWN!!
So there.....]:)
Begs the question, though, of how the "trois" would be formed - now if it was une femme et deux hommes, mon choux, then you could be on to something.....provided les deux hommes could take instructions.....]:) ]:)
Aha! - Gottit! I keep jck over here till you land - is that the plan? :^O
oh, we could have some fun with "les mots" then, too... (in/out, up/down, harder/softer, faster/slower, tweak....)
ok, I'm gone, second gigglefit of the day, can't see for laughtears...:^O
:x
GG
by jck
You are making me feel like a dog that is going to be kenneled. Oh jeez...and...there's a 6 month quarantine in Britain...I better give notice at my job before I leave for this. :p
Well, I could tell you a sure-fire way to keep me there, but I don't think it possible.
The Irish would be more likely to be able to grant me that wish.... (that's likely to draw some fire!!! ]:) )
OK...gotta go...had to come in this morning. I'll be leaving before noon. See you all later.
by gadgetgirl
I thought you were only off on Friday to make your Labor Day a long weekend!
(as you're in, don't forget to claim back the half day you just used up!)
Keep you here? Well, I'm sure I could find some ways of tempting you to stay.....]:) :x
But not in a kennel! - no, your vassal would not do that to her King Swill, wouldn't even think about it!
I assume the "sure fire" way to keep you here would have something to do with Guiness, then??? :D
Have some wonderful time off, and let me know how the brew goes (and how quickly it goes, too!)
Watch out for low flying hangovers, they're dooozies!
:x
GG
by jck
GG...you are truly a fantastic vassal...how should I reward you? ;) (Don't say money...I'm a King...not an aristocrat!!)
Umm...As for what can get me to stay...I can say...Guinness could keep me there a while, but Ireland has more Guinness...so...I'd migrate after a while.
No...there's something Irish that could quite possibly keep me there for the rest of my life...well...besides the fact that the Irish people I know are the most well-mannered, upstanding, good-natured, funny, giving people I've met...and...they make the best beer in the whole friggin world. :)
Well...not someTHING Irish...that's kind of demeaning...it's someONE. I'll leave it at that.... (ooooh...mystery from King Swill!! :D )
Must go...got 4 other projects to go over while the accounting department this morning reviews their new Expense Entry software I wrote. :)
Might be back a time or two more...otherwise...everyone have a good weekend...
And GG...I'll be watchin WC qualifiers this weekend :) (No EPL :( )
by gadgetgirl
I already know who the someone is - remember? It's no mystery to me, I'm sure that she was the origin for your passion of all things Irish in the first place! (apart from the Guiness, of course!)
Ok, EPL I got, but WC? Why you wanna go watch a toilet? Hmm?! :p oh, yes, I see the correlation now - sewers! ]:)
Sorry, irresistible!!
Get outta there by lunchtime, my liege, and have a good "tasting" afternoon
GG
by jck
I let the cat out about the Irish lass?
Christ...I'm forgetting what I say now. Next thing you know, I'll forget about my vacation. :(
erm...I loved Guinness a long time before I knew of her. But, no chickens being counted yet. I learned a long time ago...wish in one hand...crap in the other...see which one gets full first.
Reality...it sucks...but, at least you have a starting point to work from with it.
Off I go...data migration awaits :)
by rough
by rough
by hal 9000
Even if we do get way off topic as we go along. :D
Col ]:)
by rough
whereas we Aussies don't have an accent AT all,it's the rest of the world who talks funny.
rotflmao
by ozi eagle
by emekusman
I actually thot i was going deaf, the only problem was dat it happened mostly when i was with my girlfriend.
Nice one
by dc guy
Different physiology, different response. Parrots, with their much tinier eardrums, hear high-pitched sounds better. If a man wants his parrot to repeat things he says, he'd better pitch his voice very high, even falsetto.
A good way to establish yourself as the leader of a dog pack is to roll one over on hist back and gently but firmly grab his throat with your teeth. This is what they do to each other. They have very strong neck muscles so you don't have to worry about hurting them if you're not rough, and it's a completely natural behavior so there's no issue of cruelty.
A couple of my dogs, especially the females, jump into my lap and offer their throats as a way of asserting loyalty and affection. If they don't get bitten they feel left out.
But you have to start when they're puppies. If an adult dog regards it as dominance/submission play-acting, you'd be surprised just how small a dog can be and get the better of you with those strong neck muscles. I spent a couple of months in great embarrassment, having to explain the semicircle of tooth marks on my cheek -- from a Lhasa Apso!
by jamesrl
Having lived in the country, and having worked for the humane society as a teenager, I've had more than my share of dog bites. While any breed or size can bite in the right circumstances, I've been more often bitten by smaller breeds. When dealing with strange dogs in a kennel, the larger breeds respond to kindness and confidence, but the smaller breeds often get nervous and lash out at the first opportunity. When you move them to clean their cages, you become the first opportunity.
I even had success with large dogs who were quarentined for biting - one a doberman who bit several people in a public park, another a St. Bernard Shepard cross which killed several smaller dogs. After a week, both dogs were easily handled. When we released the doberman back to the owners, I could see the dog backslide in minutes.
But alas, I had many small dogs that never got over their fear, and that made them hard to adopt as well. I wore heavy leather gloves for handling...
James
by hal 9000
It was always the smaller dogs that where the biggest problem! They would be all over you when you got there and take large chunks out of you as you where leaving after you had been paid for the job and couldn't charge any more. :(
With the big dogs you always knew where you stood they where allowing you onto their property but you would always be under supervision and if you did anything at all that they didn't like you knew what the outcome would be. Generally though they would just hold you up and wait for someone to come and find out what you where doing. :^O
The absolute worst one was a French Poodle who jumped up and bit me on the leg as I was leaving the front yard it held on for dear life and caused some massive wounds on my leg and ruined a perfectly good set of pants as well. I asked the owner to ring the office and tell them that I was going to the Hospital for treatment which of course she didn't do and when they rang her she just said that I had left there ages ago. Of course when I got back to the office I was in for it for disappearing for several hours and not contacting them to let them know where I was but as soon as I got to the Hospital I was rushed into the ER and treated so I couldn't make any phone calls. Today it just wouldn't be a problem with Cell Phones I would have rung the Office on the way to the Hospital but back in those days it was a different story. The only good thing to come out of that whole incident was that that customer was "Black Listed" and from then on had to bring the unit in for service as required we never sent another Tech out there ever again. :D
Col ]:)
by hal 9000
I'm in real trouble now and I don't know how to get out of it. :(
I went to a show the other day and took some photos for my sons girlfriend/live in lover or whatever and I took along the Blads. BIG MISTAKE. I was shown the new H2D the 22 Meg Pixel unit that Blad is making it makes the old 11 Meg Pixel back that I have look absolutely primitive. Now I want one. :)
Only trouble is the price of the things and I really don't think that the argument will be good enough that I already have enough lenses so I only need the bodies and backs. I really think it would be much safer to bring home another 25 computers and set them up rather than even mention the new Blad. At least I know how "She Who Must Be Obeyed" would react to that but a new Blad is a different story I have absolutely no idea how she would react and I'm way to scared to even contemplate mentioning the thing. ;)
I don't even thing buying her a Gull Wing Mercedes in perfect condition would lessen the impact of a new Blad. :(
Now my life is miserable until I can figure a way to get one into the house without her noticing. They are so nice and only a little over 2 Kilo's with a 80 mm lens. My pistol grip would be a perfect addition to one and along with the Metz Flash OH well I can dream on I suppose. Even when I have to replace the battery for the Flash I get no end of grief and they are cheap I have no idea of how she would react if I even borrowed one and bought it home to have a play with that was why I refused the loan of one the other day I just slid on the view finder and changed out some lenses and ran off a few shots then downloaded to my NB it's a really nice camera and I wouldn't dare mention it in front of the wife. :(
Life can be so cruel!
Col ]:)
by lukos
by jdclyde
but only if you have a big set of hooters, as a few of our female members have pointed out this week.
Is there really something musical that men just can't "get"?
Or is it women just rarely say anything men care about?
by gadgetgirl
how every time the word sex is mentioned, men always hear THAT!!!
How many men do you know that don't hear the words "Take me to bed, babz, I want you badly...." ?? Hmmm??
None?
Well
There's a surprise......:D
GG ]:)
by sleepin'dawg
of the dogs, 'cause guess where you'll be sleeping??? Here where the $CDN is worth more than the $AU the price on the H2 sat me down; hard and set me to drink. I can justify the expenditure but that price made [b]me[/b] blink a few times; quite a few times. You need an H2 like you need a spare nostril. I bought 8 of them for my crew, however, I didn't buy any for myself; just can't justify the cost. Besides, I can always borrow any of them if I take a turn for the silly . Do you have any idea of what the insurance on these suckers would cost you??? Try 10% of the value, annually!!! Its one of the required necessities they don't bother mentioning. Hang one of those things around your neck and you'll be drawing rip-off artists like flys to sh*t; which by the way will drive your insurance costs up if you have the gall and temerity to lose or damage it. Buy one of these and "She Who Must Be Obeyed" will see to it, that you'll become qualified to run in [b]The Gelding Stakes[/b]. When I started in the business, I started out with used equipment. Why you may well ask??? Because there are hordes of silly amateurs who simply equate good photography with the equipment and as a consequence run out and buy the latest most expensive camera they can find. At best they might put 12 rolls of film through their cameras in a year. Even now, with the onset of digital, I still put at least that much film through a camera in a week and often more. Curb your patience for a while; I guarantee H2s will be on the used market within eighteen months to two years. Let some other fool absorb the initial cost but even then you'll still have a hard time justifying it. If you think there are a lot of menus to wade through on a Happy Snapper, wait till you try one of these.
Re your Metz flashes. You can save a lot by buying some surplus web gear and a couple of pouches. Put a 6V motorcycle battery in one pouch and the power unit in the other. Arrange the lot so the load is balanced. I use the suspenders as well, since I also carry other equipment as well. The adaptation of the motorcycle battery will cut recycling times, on full power, last through about 85 rolls of 36 exposure 35mm, all at full power and cost a fraction of the Metz battery units. Shoot automatic flash and you'll never run out of power. They also last longer than Metz rechargables especially if you get gell batteries. Total cost of the conversion, battery and web gear should run you in the $50-$80 max region. BTW all our Metz units have received this modification ever since the Metz 401 and that's been almost 25 years. We've replaced a few batteries but nothing like the rate we were replacing Metz Ni-Cads and the motorcycle gell units have no "memory".
I thought you weren't impressed with Digital???
[b]Dawg[/b] ]:)
by sleepin'dawg
Any time, any where, any how!!! You know you have yours ardent corps of lusty,[b]trusted?[/b] admirers. ;\
[b]Dawg[/b] ]:)
by gadgetgirl
I could have been inviting suggestions, or suggesting invitations.....]:) ;\
so Martini man... (hope you got those ads over there, or that one will bomb badly!)
choose your answer.. (in your favourite order, of course!):D
1. I was merely stating facts...men don't hear any sentence that doesn't have a particular connotation mixed in it somewhere.
3. If it was an invitation, DMambo for one would run a mile in absolute shock! :D
2. What would you do if I said it was both a suggestion and an invitation.....;\ ]:)
GG
by sleepin'dawg
Should I phone you or nudge you.(Subtle, eh wot?)
No we don't see the Martini ads here but I've seen them there. BTW I took it as suggestively inviting.
[b]Dawg[/b] ]:)
by dmambo
You made my ears turn all red. Please don't even think my name when the topic turns this way.
I'm like Jerry Lewis in the old movies, but the French don't like me.
:D
by jaqui
to be carefull there sd.
any how?!?!?!
run, fast and far. I bet gg is on her way to get a strapon to use on ya. ;)
by sleepin'dawg
GG in the role of an S&M dominatrix??? Hmmmmmm???
Now there's a thought. :O
[b]Dawg[/b] ]:)
by gadgetgirl
I'd actually gone off to get the whipped cream and chocolate body paint to use on him..... ]:)
Well, I really thought I should, seeing as how he's providing the mimosas and the waffles...
Now, where's he put those silk sheets? Where's he hidden my basque? ;\
GG ]:)
by jdclyde
[i]Or is it women just rarely say anything men care about?[/i]
If you say that, we listen.
If you start going off about what Oprah said today, our eyes either glaze over or we just stare at your breasts.
It is all about coming DOWN to our level baby!
That is why when my boys are about to be born, I prayed for three things.
Let them be health
Let them not look alike
Let them be boys.
Ain't no way in he11 no daughter of mine would ever grow up to go out with a guy like me! Not when I think of what I have done to other guys daughters! ]:)
by gadgetgirl
if it ain't sex, you guys just don't wanna know! Which is what we women having been saying for centuries...
and you just proved the point, dearest. ]:)
Now, coming DOWN to your level...;\
- did you forget I'm a guttermoth? I'm already there! I never left in the first place! :D
GG
by jdclyde
"Sorry, I didn't hear you. I was staring at your breasts."
Man, I miss the DuckMan show!
Guttermouth, sure YOU have been enlightened, but many out there are still clueless at to our true purpose! Eat, Drink, and do Mary!
by hal 9000
When you are talking to customers explaining what they did wrong I have both male & female looking at the ceiling with Glazed Over Eyes not understanding a single word that I've said. So they look at your chest BIG BLOODY DEAL!!!!! At least you still have their attention. :p
At 10.00 PM last night I had a surgeon ring and ask why his computer was doing what it was doing when I asked him to describe what was on the monitor he held the phone to the screen and expected me to know what he had done wrong. His wife who also asks questions whenever I try to answer her questions walks away saying "I'm Listing!" and grabs a bottle of Scotch and just drinks away to herself while I talk.
You women have it so easy!!!!!!!!!!!!!!!!!!!!
Col ]:)
by gadgetgirl
I think you have the wrong impression of me - - - I'm not that way inclined
in the slightest
I thought you'd have realised THAT by now...
;\
GG
]:)
by jdclyde
We were discussing MEN and THEIR purpose for being, and for women to simply be aware and oblige! ]:)
Translation, for the women they are to BE Mary, not Do Mary! (unless I get to watch and help!) :x
As for my Duckman quote, that used to be the wav file my system would play when I shutdown!
"Quick! Help me get her inside while she is still posable!"
Well my sweet, A happy morning to you, (which you may translate to a wonderful afternoon due to times and currency changes!) I am back to the slave pits with corrupt thoughts in my head about you! (I mean that in the best way possible! Woo woo!) ]:)
by gadgetgirl
keep thinkin' ...........keep thinkin' !!! ]:)
GG
by gadgetgirl
just nudge me gently, as you bring me breakfast in bed....
not too early, I'll need to recover after being . . . . down . . . . all night....;\
GG
by gadgetgirl
about me? ME? Sweet, innocent little ME?
oh, all right then, as long as you tell me what they are!! I like to have fun too, you know!
BE Mary? No. No thanks. Been down that route...
Would rather be Linda...
Lovelace...
oh, grief, where's a webcam when you need one! I'd dearly love to see the look on some faces now!
GG ]:)
by hal 9000
For the 500's that I have and I would never under any circumstances consider trying to hang one of those around my neck unless I was lying on the ground first. If I was to try it the camera would be dragging on the ground in no time at all. ;)
And you're right for my needs the digital currently isn't in the same class as the 500ELM with VPS in the backs which I use a lot of. When I'm forced to I use a pistol grip but honestly prefer a Tripod to mount the things on Far easer to move around that way/ :)
What I did like about the H2D was the fact that I could slide my View Finder from a 500 ELM body onto the camera and have it work perfectly rather than looking down on the shot like what comes standard with the Blads which is at best terrible and most likely the worst design flaw in the entire unit. But then again I don't like Rollies either as I really prefer through the Lens focusing but they do look nice and different with those two lenses on the front of them.
But as for expanse I use a Blad 500 ELM and the batteries for those are horrendous they are about the only thing that I do buy new and they are hardly new by any stretch of the imagination but they do work quite nicely and the H2's can use the same lenses which is a definite advantage. About the only thing that was brought new was the 1,200 mm Lens which my brother needed when he was alive for some job that paid for the lens {twice actually} as someone dropped it overboard from the rat tails on a square rigger. The guy in question who's only job was to hold lenses was thrown in after it for some strange reason. :^O
But it hit the water and not the deck so other than a little salt water damage it wasn't really hurt {good thing it floated for a few seconds so that the guy could find it. :D
Actually I've never lost a single Blad ever although one of my other brothers had a specially made theft proof box made for a Land Rover and he had all his medium Format Cameras stolen outside an Italian Police Station while he was inside.
The worst that I've ever done was to drop one in a swamp at the time there was no lens or back on it so it didn't work when it was retrieved bad design there after all I only had it for 10 years without a single service and it broke. I've had to replace several circuit boards in the view finder as the gold plating wears off switching the light meter on and off all the time but other than those few items the 3 Blads have performed flawlessly and I do have several camera cases to use for different jobs when not in use they all sit in their own special box which you'd need a fork lift to move monster of a thing that it is.
My brother died in 89 and I inherited the Blads then and they where hardly new then but have just gone on keeping on without too much trouble. I to use a Motorcycle Battery of the Jell variety with the Metz power packs but I've got to be careful there as "She Who Must Be Obeyed" gets very concerned if I approach any place that sells Motorcycle bits she knows me far too well there. :D
But as it stands now one of the guys that I went to school with owns one of the top Pro Labs in Brissy so I get all of my film for cost and only pay very little for processing if at all on the down side I've been known to spend several days in there fixing their computers on occasions. That's where I got the Digital Back for the Blad bodies that I have it was payment for a job.
But the H2D is a very nice unit I've only run off about 120 GIG of pictures through one but I only had it for a few hours to play with and I liked it a lot. Still isn't ideal for real photos right at the moment but in about 5 years time I could just about justify having one.
Unlike a lot of the new things I can see an improvement over their older products and that is why I like it but honestly right at this point in time there are not the places available to print medium size pictures sure there are lots of 4 X 6 and the like in some fairly decent finished available but the Pro Labs don't have the equipment to do big Digital prints yet and I don't fancy cutting and pasting in Corel from A4 Paper + I'd have to pay for the ink!
Col ]:)
by gadgetgirl
just be grateful it was only your EARS that turned red....
(Now come on, DM, you know my mind well enough by now, you walked straight into that one...by a nose!!)
GG
by hal 9000
Works IT so you can expect anything! :p
Col ]:)
by jdclyde
"That movie has WARPED my fragil little mind" [i]Eric Cartman.[/i]
While he was refering to "A$$'$ of fire", it still fits!
GG, just how flexible are you? Please tell me VERY! It helps with the imaging! Woo Woo! ]:)
"What do women put behind their ears to make them look more appealing to men? Their ankles!" :O
(how is that for a visual Mambo?)
##### edit #################
WARPED, not corrupted! DOH!
by sleepin'dawg
Someone told me that over on your side of the pond a Mimosa is called a Buck's Fizz. If so, it lacks that touch of delectably, delicious, decadence that Mimosa implys. I suppose you will be demanding maple syrup for your waffles, the real stuff and not the watery muck that DMambo would serve up. Just think, if any got spilled it could be licked up, without it getting all over the sheets, silk of course. Some go in for chocolate and whipped cream with cherries, we Canadians are much more suave; we use maple syrup and wid blue berries while you sip genteelly on your Mimosa. What's that??? You say you'd like a Drambuie to sweeten your coffee??? B-)
[b]Dawg[/b] ]:)
by sleepin'dawg
I own a 500C 25th aniversary model and the 50th aniversary model as well. I have a 500ELM 25th aniversary model as well as two regulars. Learned a while ago to get my butt down to the local electronics outlet and buy nickle metal hydride cells solder them together shrink wrap them and replace the Ni-Cad 'Blad cells. You have to hunt a bit to find the appropriate cells to match the output of the Ni-Cads but its worththe effort. Capable of more recharges and no memory effect. What's the point of being a tech type if you don't use it for anything other than computer sh*t??? Got an 11 megapixel back too.
Do you Aussies live in the stone age??? What do you mean there are no commercial processors who can handle big prints??? I could walk to at least three from where I'm sitting right now. 4'X8' big enough for you??? But then why should I walk anywhere??? I just call one of my lab rats to come and run some prints off for me.
[b]Dawg[/b] ]:)
by dmambo
You can call me stupid. You can say my kids are ill-bred. You can say my wife is ugly. But when you start bad-mouthin' Vermont maple syrup, you're startin' to piss me off. It beats the hell out of that flat-land Ontario crap!
(BTW, my kids are well-mannered and my wife is very attractive. 'Nuff said.)
by dmambo
Why does my name keep coming up in this gutter-based thread? I'm the only bride here who could legitimately wear white to my own wedding.
Ummmm....scratch that, but I think you get the gist of what I'm trying to say, you sick, perverted, gutter-dwelling, swill wannabes.
by sleepin'dawg
we control over 95% of the world maple syrup market. Put a glass of Quebec syrup down next to anyone elses and you'll pick the Quebec syrup out for it's richness of colour and body. Vermont syrup, New Hampshire syrup, Maine syrup, New Brunswick syrup, Nova Scotia syrup, Ontario syrup (ewwww yuck) are all just pale, bodyless immitations. But then that's the way you like your beer too, isn't it.
[b]Dawg[/b] ]:)
by dmambo
I was just testing you.
Duh! Kind of took the wind out of my flaming post, didn't you?
BTW, those are the same reasons I married my Quebec wife, for her richness, color and body. (Except for the color part.)
She's just like your syrup!! But even sweeter!
by comp1systems
I guess this explains why my boyfriend likes to cut me off
everytime I'm talking about something, or trying to tell him
something. Or says, "Huh? What did you say?" All us
women don't need is to give our fellow man another reason
to ignor us.
by gadgetgirl
is starting a conversation, and then giving it the occasional word to keep them interested...
e.g.
"I was thinking, darling, that this weekend we could go to ......." The immediate come-back asks if you just said sex in that sentence, and no you didn't you were planning for the weekend. Please notice the positioning of the word - men don't do planning for the weekend, unless it's something they particularly want to do, or that they've instigated.
Obviously, it takes a bit of practice, but it does actually work. Now if I could just get the funding to take this bit of scientific research further, I would, believe me! Just carry on with the conversation, smattering it with his favourite words, and you'll keep his attention.
the only time this has let me down so far I accused the guy of being sex mad, purely because he heard sexual orientations in everything I said!! (Having said that, I was trying to get him to concentrate HARD on a particular something, so perhaps I over did the smatterings....!)
Now, let's see how many girls on here apply that, and we'll get a count of how many men fall for it.....! ;\
GG
by jaqui
by m_a_r_k
by hal 9000
Most of the commercial places are just no yet set up for decent size prints most of the ones that I do are for Proofs only and a few end up as 30 X 40 inch prints which still are not available yet but they'll be coming. My mate in in the process of changing one section of his Lab over to Digital Only and eventually I think that will be the mainstay of his business but as yet they are not capable of doing those prints yet. I've just dropped in a 200 GIG drive with 3 full loads from the H2 to see what they look like in Proof format. I might even sell a couple of them. :)
You know that things are bad when you show up with better equipment than the Pro that has been hired for the day and since it was a bit of a Trade Show type thing the Blad guy spent all of his time with me as there was no one else willing to pay the price of those units. I think he thought he was onto a "Sure Thing" with me as I had so much Blad hardware there.
Good idea about the Ni Cads for the 500"s I'll send one of my workers out for some as it would cost me far too much money taking the time off to find a place that sells the right ones, I've got one Tech who's due for some punishment so that should do the trick nicely. :D
He'll be thinking that I'm going to sit him down and make him write some code as he got me into no end of trouble when he borrowed the Wifes Car for the day apparently he rang her up and arranged to meet her somewhere and change cars when she asked questions he said that Col knows all about it so "She Who Must Be Obeyed" took it out on me and I didn't know anything at all about it apparently he wanted the coupe for the day to show off so a few hours of hunting around Electronic Stores for the desired batteries and a few burn fingers from soldering the things together should work out quite nicely and then I can make him punch some code. :^O
Col ]:)
by jaqui
by gadgetgirl
Hmm? Physically flexible? well, yeah, but not as flexible as I used to be...
(and you know where I have arthritis. But I can get past that, too.....;\!!)
Mentally? As in - open to ideas? Experimentation?
BRING IT ON, BOY, BRING IT ON!!! And I bet I can match any suggestion you make!
(quick, put the webcam on DMambo, he's blushing again, he's like a red searchlight!)
(I knew he wouldn't really resign from this thread! Caught him looking!)
BTW, jd - it's Gutter MOTH, not Guttermouth! I don't swear! (Chapel! Chapel!) and DMambo named me that cos I was like a moth to the flame when it comes to me heading for the gutter/sewer/south!
GG
by gadgetgirl
you promised me breakfast in bed.....
with mimosas......
an' a liqueur coffee .....
GG
by jaqui
by gadgetgirl
that's when I started my initial research! :D
GG
by jaqui
or cause I'm one of those guys that women can talk to about anything.
:)
~muttering~
though why I get women asking me if I have any tampons while I'm walking down the street I don't know...
by gadgetgirl
that you're so far orienteered in that direction, you think you're hearing "those words" all the time.....
;\
GG
by hal 9000
And where the results are being published and I'll read up on what is supposed to happen. :^O
Of course because I'm scared of women I would have to read it alone and away from anyone. I've already had one Sexual Harassment suit bought against me by a frustrated pregnant woman and I only opened a door for her and said "Good Morning!"
When things like that happen I'm not game to even consider talking to any woman that I'm not married to. :D
Col ]:)
by gadgetgirl
you're just a little scaredy cat!
"She who must be obeyed" has you so very well trained....running scared the whole time.
I'm very proud of her.
Tell her to publish her training papers on the 'net - she's gonna make the pair of you an absolute fortune!!
:D
GG
by jaqui
until I met my wife you almost had to hit me over the head to get my attention onto having sex.
my sex drive is almost dead.
my wife, nympho that she is, only has to touch me and I'm all ready to go.
...
or breathe on me... snuggled up in bed alseep and she blows on my back ( yes back ) and I'm awake ready and raring to go.
by gadgetgirl
all she has to do is blow on your back....
hmm. that's the first time I've heard that one.
Now, who can I try that out on to see if it works on all men.....hmm.....let me think, now.....
]:)
GG
by jaqui
it works on all men.
it only works on me when it's my wife.
:)
have you seen the "MOTT'S Clamato" commercials where they say:
" Edited for QCC compliance"?
there is one where the guy has a set of twin blondes in skin tight jeans taking him off camera.
one of my neigbours has a body like that of both blondes. ( I nick named her Dessert )
[ have you ever heard anyone say, I'll skip dessert and have dinner? ;) ]
by gadgetgirl
but I got the drift of the post!
Personally, I'd skip dessert, I'm into more savoury things
.......... like ...........
.................. Sausages ..................
:D ;\
GG
]:)
by jaqui
my furr burger and side of thighs.
:]
by jdclyde
Not I, Mambo, not I.
That title is locked up tight. :)
I am simply a humble person who is "Sexually Oriented". ;\
Always lived by the motto "Try anything once. If it hurts, try it again!"
Hot wax is fun...... ]:)
Sticks and stone may break my bones, but whips and chains excite me. :O
____________________________
typo? what typo?
by gadgetgirl
or Freudian slip, whatever you wish....
"whips and CHANGES excite you" ????
now then, jd, is there something you're not telling us?
Hmm?
C'mon, give! When you getting the op, eh?
GG
j/k - honest! - :x
by gadgetgirl
very good, Jaqui, very good....
I'll just stick to sausages and meatballs......
and
cream....
]:)
GG
by dmambo
Now my mind's eye has seen everything! The thought ou jaqui getting all excited when jd blows on GG's back when she's all bound in chains (or whatever it is, these things are all jumbled in my overloaded mind - must repress, must repress) is just too much. This time I'm REALLY quitting this thread.
I'll be back later to check up and make sure you people have cleaned it up. (Hope not - damn, must repress)
by gadgetgirl
- just HAS to go to the one before this one, by DMambo!
I've not laughed so much in absolute months! I'm still giggling while typing, and thank goodness I can touch type, cos I still can't see the keys or the screen for the tears...
Priceless, DM, absolutely flippin' priceless.
You just made my week, if not month.
Thanks, D!
:x
GG
by dmambo
Until such time that JDClyde is freed from his bondage, I will refuse to accept this....
What's that? He doesn't WANT to be freed from his bondage???
Nevermind.
Sort by Trending