Question Locked

Brother Multifunction fax knocks out digital phone line.

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I had an old brother multifunction fax/copier/printer hooked up to my comcast modem via a hub that also held my phone line. Got a new Brother multifunction machine today and when I connected my fax line into the machine, it knocked out my digital phone line. Tried resetting, tried reconnecting, but the phone line is dead as long as the fax machine is connected to the hub. If I unplug the multifunction machine, the phone comes back on.

Any ideas as to why this happens?

3 replies

by thechas

Since you did not post the model number of the new Brother, we can do little more than speculate.

I would start by checking the setup options in the user manual. There may be a setting for use with digital phone lines versus regular phone lines.

It is also possible that the old machine was a business model that was configured for use with IP phone systems and thus worked with your digital phone line, and that the new machine does not have the IP or digital phone option.

Chas

by robo_dev

When you say 'fax machine is connected to the hub', that does not sound right.

so assuming that you have comcast voice-over-ip, then you have a voip cable modem which has available both ethernet (to plug computers into) and analog phone jacks (to plug phones and fax machines into).

My guess is that the new brother device has an ethernet port, and you plugged it into the analog phone jack. It should also has an analog phone jack that you should plug into the analog phone port on your comcast cable modem.

If, on the other hand, you have comcast DSL, then you just need a DSL filter for the phone line going to the new device.

This discussion is closed to new replies.