General discussion
-
Topic
-
Can not spool data fast!
LockedHello.
I recently installed an HP 5652 inject printer. The printer is connected to a print server box (Planet FPS-5P-6).
I configured my Windows NT 4.0 server to spool data to the planet print server.
The problem is that whenever I print a complex document with heavy graphics from a client PC (Win98) the spooling takes a lot of time (2-3 minutes even for simple documents) and the result is not good because some parts of the document is missing.
Now, if install the printer locally with the same (HP 5652) print driver then the printer prints out the document without problems quite fast.
In order to solve this problem, I installed on my Win98 the 870c old printer driver that comes with the Win98 O/S. I noticed that when I spool the document to the planet print server it is printed but in low quality (870c).
Also, I installed the printer directly to LPT1 of a client PC (win98) and then I shared it but the problem was not solved. The data took a lot of time to be printed and some parts of the document were missing.
My clients PCs are Win98 (AMD 233Mhz, 32MB).
Any ideas what is going on based on these symptoms?
HP suggests to use Jetdirect netcards and HP print servers, but as I told you I connected the printer to the LPT1 of a PC and then I shared it but the problem was not solved.
Is it to do with my Client Pcs and my Network?
Thank you in advance.