Discussion Locked

Can only use 2GB of a 40 GB HDD.

0 helpful
15 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I recently upgraded to win2k, from win 98 on a HP Pavilion 8575c. I have a 40 gig hdd. But, I can only use 2 gig of hdd space. The present file sys if FAT 32. I've tried to convert to NTFS but unable to convert. I need to use the whole 40 GB ofthe HDD. How can I get the full size of the HDD?

15 replies

by beanpole

If you don't mind re-installing, you can to a clean install of win2k and delete the 2gb partition and recreate a 40gB partition using NTFS, the downside being that you will loose everything on your hd. You can also use Partition Magic to change thesize of the partition to use the whole HD.

by dave.osborne

You might check the HP website about a BIOS upgrade for that model computer. If you have never upgraded the BIOS (and it being an original win98 machine) the current BIOS probably doesn't support large drives (over 2GB per drive letter).

by bchesmer

Another way you can do it is use diskmgr to partion, then format the unused space, and add it in as a "D" (Or any other drive letter you choose) drive.

If your drive is only showing up as a 20GB drive, try updating your BIOS (Is this the origianlHD?).

by bchesmer

If you don't have a copy of "Partition Magic" you can save the $69.95 and do it the way I mentioned.

by ^trix

I would get a copy of Partition Magic 8.
With partition magic 8 you should be able to convert your drive to NTFS and repartition it out to use the whole 40 Gig avaliable on your drive. If you do not want ot convert to NTFS you can always keet it in FAT32.

by choppit

3 options.

1. Resize partitions using Partition Magic or similar.

2. Create a new FAT32 partition in the remaining 38GB. Create an image of the primary partition using Drive Image or Ghost. Cut to CD. Delete and re-partition. Restore image from CD.

3. Delete partitions and start again.

Options 1 and 2 are good and will allow you to keep all apps/data intact.

If you performed an upgrade over W98 as a pose to a clean W2K install then I would recommend option 3. (Make sure you have the drivers available before doing this)

This discussion is closed to new replies.