Windows Forum

Ask something
Discussion Locked

Cannot supress seperator page

0 helpful
9 replies

by ideafixer

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am using a WIN2000 machine and attempting to print on a network printer port to a HP 4050 TN PCL 5se. I have installed the printer and everything works great except I do not want seperator pages.

First, I suspect to get ride of these pages Imust supress the advanced options? I cannot find anything that specifically referrs to seperator page. I gave myself rights to everything on the permissions tab. When I select the the advanced tab then uncheck the option to Enable advaced printing features I get a message "Printer settings could not be saved. Operation could not completed."

Am I looking in the wrong place to shut off the seperator page?

What should I do?

Thanks,

Rob

9 replies

by quintar51

Hi Rob.

You are correct, it's in the advanced tab at the bottom. The button says 'seperator page'. When you click on it, it will display the path to the seperator page and you can just delete it.

If you're still having problems, I would look at HP's website for any additional documentation.

by hootie14

Hi Rob, You do not need to disable the advanced printing features to disable the seperator page. If you have Novell you might want to check the Novell propertied, and Default Capture. Make sure it is not set to print a banner page. You are looking in the right place there should be a seperator page button in the Advanced tab.

by ideafixer

This did help me a bit. I am looking to supress the banner page. Just cannot find were that option is! Help Help

by ideafixer

I do not have a seperator page selected under advanced. I do not see anywhere in the properties for this printer to supress a banner page.

by hootie14

Rob try this
1) A)If you have the red Novell N in the system tray, right click on the red "N" and select "Novell Client Properties"
B) If the red "N" is not in the system tray right click on "my network places" icon on your desktop and select properties. Right click on "local area connection" and select properties. Highlight "Novell Client for Windows 2000" and click on properties.
2) Select the "default capture" tab
under Banner Settings take the check mark out of the "Enable Banner Settings" and click on OK twice.
Your banner page is disabled

Hope this works for you

by ideafixer

I do not have an N in the tray icon area. I followed the instructions above however I do not have "Novell Client for Windows 2000" listed under propeties.

Actually when I enable the tray icon under by checking the box I get two computers with black monitors in the tray. They occasionally turn blue as to emulate a network connection.

Still no luck... please any other suggestions??

by ideafixer

The answer:

There is an icon in control panel for CNSW. Client for Netware service. When I open this icon the banner option is there.

This discussion is closed to new replies.