9 replies
by vinnyd
Do you have a mapped network drive to the server?
You can not join the domain is there is a mapped drive to the server.
by lhoffman
by mrjay67
is the domain folder labled properly? I know in Active Directory you have to have a folder with the exact right name of the domain. In my case I had put the full name(ie: my.server.com) instead of just using server.com. Without looking at it I cant tell you the exact steps but try creating the folder with the domain you intend on connecting to. You should see it populate with extra info in the folder. You might need to reverse the situation(try using the full name instead of partial). I had similar problems the first time i tried setting up my test domain and after quite sometime tried this and it worked.
This may not be your situation exactly but thought id share my experiance.
Jason
by lhoffman
by dwdino
Your pc must have an account within the domain, in other words; it must have proper security rights, issued when joining the domain, to initiate link with domain.
Most likely this pc's account within the domain has not been created (not a member)or has been deleted.
Set the pc to be a member of a workgoup, name is not important. Reboot. Now join the domain, assuming you have the proper account privelages.
by lhoffman
by roniperk
Since you can ping the Server, TCP/IP is working properly. The problem is you client machine's TCP/IP Properties.
If you're using static IPs, make sure you're using the correct subnet mask and "especially" the correct DNS Server!
If you're using a DHCP, do an IPCONFIG to make sure the client isn't receiving an APIPA (169.254.0.1 - 169.254.255.254) and has the correct IP Address for the DNS Server.
by lhoffman
by lhoffman
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending