General discussion


Can't connect to domain

By wellmax1.maxwell ·
Hi Techies,
Please help with this problem, i have a windows98 computer that was giving me some I clean the drive re-install win 98 and upgrade to win 2000 pro.but after doing that I can't connect to my domain server,in the device manager the enternet adapter has a yellow question mark should i install the device driver to enable network to work,if so where can i get a driver for it.when i try adding the computer to the network using network id the message .

please advise

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Comments

Collapse -

by Oz_Media In reply to Can't connect to domain

Firstly, the question mark indicates a device driver conflict, it may be an interrupt request issue.

Remove and reinstall the card AND drivers.

I am not sure what your last couple of lines mean but if you can post the adapter type and model, I can help you find the right driver.

I would recommend removing the card and taking the name and number straight off the card itself, if you have the wrong drivers installed it will most likely be showing the wrong information the device manager.

Collapse -

by mex_carnal In reply to Can't connect to domain

I agree with the last reply, you have the wrong driver for the network card, open up the computer and get the manufacturer of the network card. Try , have to sign up for membership but its free. Been very useful to me.

Collapse -

by wellmax1.maxwell In reply to Can't connect to domain

The driver is as follows:

fa311 rev-b1

Collapse -

by glyall In reply to Can't connect to domain

go to for your driver

this is netgear site. You should alway go to the manufactors site for the driver for the hardware.
That way you get the latest update.

I got this site from search

Good Luck

Related Discussions

Related Forums