4 replies
by daniel.riveramiranda Accepted solution
by ic-it Accepted solution
Download a copy of Nlite and use it to add the needed drivers to a new bootable installation CD.
You will need your current one handy.
by jamesmondtan Accepted solution
What hardisk are you using? SATA?
If so you need to change setting in bios. See any posible to change the hardisk to ide hardisk.
Boot using winxp installation cd . you should be able to use the hardisk now.
Still there is another way, someone (from the web) said there is driver that can install and make xp recognice SATA hardisk.
After succefully install xp you can change (in bios) ide hardisk back to SATA or automatic detect.
Try it out. Maybe able to solve.
by frankf Accepted solution
If you have no floppy controller the choices are limited. USB floppy will most likely fail because MS doesn't support most USB floppy drives during install... see http://support.microsoft.com/default.aspx/kb/916196/
I installed XP Pro on a desktop with Intel DG33TL motherboard with onboard SATA RAID by using the NLite download... see http://www.nliteos.com/download.html
You have to have a working computer.
Copy the entire MS XP CD to a new directory, and obtain and copy the SATA text mode drivers to another directory. (I used the SATA floppy from Intel to provide the text mode drivers.)
Install NLite (you must also install .NET 2.0). Using NLite, you will create and burn a new CD that includes the SATA drivers from the alternate source. Use the new CD to install XP on the SATA machine and no floppy will be prompted.
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending