General discussion

Locked

Can't see total RAM

By dasteksys ·
What is the command or utility to total check memory on NW 4.11 I have 256 installed in my NW 4.11 and the server only see 66 meg. I've installed the lastest service packs. I been experiencing lock-ups and I wanted to install more ram, but I noticed only 66meg is used out of 256meg.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Can't see total RAM

by TheChas In reply to Can't see total RAM

Check your BIOS settings, and be sure the OS/2 switch is not set to block reporting of memory above 64MB.

Collapse -

Can't see total RAM

by dasteksys In reply to Can't see total RAM

Already verified that...thanks anyway..

Collapse -

Can't see total RAM

by rmp88 In reply to Can't see total RAM

Check your config.sys file and make sure that no memory management programs are loading (i.e HIMEM.SYS,EMM386.EXE, QEMM). These will cause Netware to not see all of your memory.

Collapse -

Can't see total RAM

by dasteksys In reply to Can't see total RAM

Thanks already checked that...Novell has assisted me with my problem...

Collapse -

Can't see total RAM

by dasteksys In reply to Can't see total RAM

This question was closed by the author

Back to Networks Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums