General discussion

Locked

cd duplicator

By yelhsa3840 ·
i got a single cd duplicator (standalone) and i put my burner and cd rom in it (cd-r master) but i cant get it to copy theres 2 buffer led's on the front and they keep blinking wen i push the record button the drives open could use a littlehelp if they have to be set up a certain way there ide interface

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

cd duplicator

by TheChas In reply to cd duplicator

Please provide the hardware details.

Check the manual or web-site for the duplicator and make sure that your drives are supported.

Chas

Collapse -

cd duplicator

by TheChas In reply to cd duplicator

You need to identify the make and model of the duplicator and your drives.

You can try swapping the jumpers on the drives so that you change who is master and slave.

However, I suspect that you need to access a set-up mode to allow the duplicator to find and configure the CD drives.

See if you can get any more information from where you bought the duplicator.

Chas

Collapse -

cd duplicator

by yelhsa3840 In reply to cd duplicator

Poster rated this answer

Collapse -

cd duplicator

by yelhsa3840 In reply to cd duplicator

theres no other info i can give there isnt any serial numbers or...anynumbers on it if it helps on the front it has one big purple button for record

Collapse -

cd duplicator

by yelhsa3840 In reply to cd duplicator

This question was closed by the author

Back to Hardware Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums