Discussion Locked

cd rom driver

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

how to find driver for cd rom
windows 98

7 replies

by bobho

Is your CD recognized by the bios? What make/model is it? Have you tried going to the manufacturers site to get a driver? what does Windows do or not do with the drive?

Post back with a little more information.

DrBob:>)

by thechas

You do not need a specific CD-ROM driver for Windows 98.

The driver for the CD-ROM is handled by the IDE bus driver for the chipset on the motherboard.

To find the correct driver, you need to identify the make and model of your motherboard.If this is a name brand system, just go the the manufactures website, and search the support section for downloads for your model.

If not a name brand, use the tools at either www.motherboards.org
or www.wimsbios.com
to identify who made your motherboard.
Then, go to the MB mfgs web site, identify your specific motherboard, and download the drivers.

The Driver that comes with many CD-ROM drives is for DOS mode access only.
If you need MS-DOS mode access to your CD drive, then you can use a driver site such as www.driverguide.com to find the driver for your CD-ROM drive.
You will need to open the case, and verify the make and model of the drive.

Chas

by b_pope

The native Window's driver is all you want for your CR-ROM or CD-RW's, the only thing you need to find is any firmware updates for your CD-ROM which you can get at the manufactures web site.

This discussion is closed to new replies.