Question

  • Creator
    Topic
  • #2224553

    Cisco 2611 DSL problem

    Locked

    by citydave ·

    I am trying to connect to SBC dsl using a Cisco 2611 router, I created my dialer and it tries to connect and is unable to. I used the Debug ppp Authentication command and can watch it dial out and I receive the authentication failed. I will copy and paste the output in here as well. I am using pap and know that my name and password are correct and have verified this with SBC, I tried using full and half duplex to see if that was the problem. SBC told me that it was a sync problem?? Any input would be greatly helpful :o)

    *Mar 16 03:58:00.056: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
    *Mar 16 03:58:00.060: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
    o down
    *Mar 16 03:58:22.260: %DIALER-6-BIND: Interface Vi1 bound to profile Di1
    *Mar 16 03:58:22.264: Vi1 PPP: Using dialer call direction
    *Mar 16 03:58:22.264: Vi1 PPP: Treating connection as a callout
    *Mar 16 03:58:22.264: Vi1 PPP: Session handle[E300000D] Session id[0]
    *Mar 16 03:58:22.264: Vi1 PPP: Authorization required
    *Mar 16 03:58:22.268: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
    o up
    *Mar 16 03:58:22.525: Vi1 PAP: Using hostname from interface PAP
    *Mar 16 03:58:22.525: Vi1 PAP: Using password from interface PAP
    *Mar 16 03:58:22.525: Vi1 PAP: O AUTH-REQ id 1 len 43 from “citydave@static.sbcg
    lobal.net”
    *Mar 16 03:58:24.023: Vi1 PAP: I AUTH-ACK id 1 len 5
    *Mar 16 03:58:24.023: Vi1 PAP: I AUTH-REQ id 1 len 33 from “rback1.klmzmi”
    *Mar 16 03:58:24.023: Vi1 PAP: Authenticating peer rback1.klmzmi
    *Mar 16 03:58:24.027: Vi1 PPP: Sent PAP LOGIN Request
    *Mar 16 03:58:24.027: Vi1 PPP: Received LOGIN Response FAIL
    *Mar 16 03:58:24.031: Vi1 PAP: O AUTH-NAK id 1 len 26 msg is “Authentication fai
    led”
    *Mar 16 03:58:24.055: %DIALER-6-UNBIND: Interface Vi1 unbound from profile Di1
    *Mar 16 03:58:24.059: %LINK-3-UPDOWN: Interface Virtual-Access1, changed state t
    o down

All Answers

Viewing 0 reply threads