Question

Locked

Cisco 2621xm and vwic-2mft-t1-dir issue

By marikesh ·
Good Afternoon,

I am having difficulties getting a couple of vwic-2mft-t1 dir cards working in my cisco 2621xm router. They keep showing as unknown wic cards. I have used several versions of IOS - including the ones recommended for these cards, 12.2 (8T), 12.3 (6c), several other 12.2 versions with no luck. Some will give me a bit more info on the cards but they still list as unknown wic cards in slots. Unfortunately, I don't have another router to test the cards in, but I do have another serial card that does show up so I assume the router ports are fine physically.

None of the standard commands in the help forums I have found are recognized either, which is weird and frustrating. commands such as card type or controller or anything to do with setting up the slots are all unrecognized.

My show information:

Router#show diag
Slot 0:
C2621XM 2FE Mainboard Port adapter, 4 ports
Port adapter is analyzed
Port adapter insertion time unknown
EEPROM contents at hardware discovery:
Hardware Revision : 3.1
PCB Serial Number : FOC08352TSW (2453667825)
Part Number : 73-7754-05
RMA History : 00
RMA Number : 0-0-0-0
Board Revision : A0
Deviation Number : 0-0
EEPROM format version 4
EEPROM contents (hex):
0x00: 04 FF 40 03 6D 41 03 01 C1 18 46 4F 43 30 38 33
0x10: 35 32 54 53 57 20 28 32 34 35 33 36 36 37 38 32
0x20: 35 29 82 49 1E 4A 05 04 00 81 00 00 00 00 42 41
0x30: 30 80 00 00 00 00 FF FF FF FF FF FF FF FF FF FF
0x40: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x50: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x60: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF
0x70: FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF FF

WIC Slot 0:
Unknown WAN daughter card
Hardware revision 1.0 Board revision B0
Serial number 34942964 Part number 800-18412-05
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 3E 01 00 02 15 2F F4 50 47 EC 05 00 00 00 00
0x30: 58 00 00 00 06 05 0A 01 FF FF FF FF FF FF FF FF

WIC Slot 1:
Unknown WAN daughter card
Hardware revision 1.0 Board revision B0
Serial number 35026667 Part number 800-18412-05
Test history 0x0 RMA number 00-00-00
Connector type Wan Module
EEPROM format version 1
EEPROM contents (hex):
0x20: 01 3E 01 00 02 16 76 EB 50 47 EC 05 00 00 00 00
0x30: 58 00 00 00 06 06 0B 01 FF FF FF FF FF FF FF FF

Router#show hardware
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 20-Jul-04 05:25 by kellythw
Image text-base: 0x80008098, data-base: 0x80C84ECC

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 16 hours, 43 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.123-6c.bin"

cisco 2621XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of me
mory.
Processor board ID FOC08352TSW (2453667825)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#show version
Cisco Internetwork Operating System Software
IOS (tm) C2600 Software (C2600-I-M), Version 12.3(6c), RELEASE SOFTWARE (fc1)
Copyright (c) 1986-2004 by cisco Systems, Inc.
Compiled Tue 20-Jul-04 05:25 by kellythw
Image text-base: 0x80008098, data-base: 0x80C84ECC

ROM: System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Router uptime is 16 hours, 44 minutes
System returned to ROM by reload
System image file is "flash:c2600-i-mz.123-6c.bin"

cisco 2621XM (MPC860P) processor (revision 0x301) with 126976K/4096K bytes of me
mory.
Processor board ID FOC08352TSW (2453667825)
M860 processor: part number 5, mask 2
Bridging software.
X.25 software, Version 3.0.0.
2 FastEthernet/IEEE 802.3 interface(s)
32K bytes of non-volatile configuration memory.
32768K bytes of processor board System flash (Read/Write)

Configuration register is 0x2102

Router#show run
Building configuration...

Current configuration : 635 bytes
!
version 12.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router
!
boot-start-marker
boot system flash:c2600-i-mz.123-6c.bin
boot-end-marker
!
!
no network-clock-participate slot 1
no network-clock-participate wic 0
no aaa new-model
ip subnet-zero
ip cef
!
!
!
!
!
!
!
interface Tunnel1
no ip address
!
interface FastEthernet0/0
ip address 192.168.1.1 255.255.255.0
speed 10
full-duplex
!
interface FastEthernet0/1
no ip address
shutdown
duplex auto
speed auto
!
ip http server
ip classless
!
!
!
line con 0
line aux 0
line vty 0 4
login
!
!
!
end


Thanks for any help or suggestions!

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums