General discussion

Locked

Cisco 5505 Switches

By The Kaisho ·
I want to join 2 x Cisco 5505 switches together(2 fibre ports on each) using 2 x 100 MB fibre connections (one to each port). Is this possible and if so, what problems can I expect ? Will be using IP and IPX protocols across both links.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Cisco 5505 Switches

by jason.myers In reply to Cisco 5505 Switches

It is certainly doable. Just make the fibers act as a cross over. Then if you want to aggregate the bandwidth of the two links create a channel group or a port group. There are no major problems that I know of.
Thanks

Collapse -

Cisco 5505 Switches

by The Kaisho In reply to Cisco 5505 Switches

Thanks for the insight.

Rgds

Collapse -

Cisco 5505 Switches

by The Kaisho In reply to Cisco 5505 Switches

This question was closed by the author

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums