General discussion

Locked

Cisco 803 Legacy DDR WITH DialerProfiles

By Ulvis ·
Is it possible to mix legacy Dial-onDemand-Routing with DialerProfiles in a Cisco803, trying to make a connection between a new ISDN WAN setup using multipple Cisco803's and an existing Cisco1600 with 30+ DDR routes ?

This conversation is currently closed to new comments.

4 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Cisco 803 Legacy DDR WITH DialerProfiles

by Ulvis In reply to Cisco 803 Legacy DDR WITH ...

Point value changed by question poster.

Collapse -

Cisco 803 Legacy DDR WITH DialerProfiles

by Todd Kimbrell In reply to Cisco 803 Legacy DDR WITH ...

Ive known it done before, but only with Cisco 1604s with Cisco IOS Rel 12 and
Cisco 804s with Cisco IOS Rel 12

I did a little research for you and here is a link to maybe help you out.

http://www.cisco.com/en/US/tech/tk13/tk133/technologies_tech_note09186a0080093c2e.shtml#issues

I would really like to know how everything works out. I spoke to my Cisco buddy tonite and he swears it can be done, its just a-lot of telnet time.

Best Regards!

Todd Kimbrell

Collapse -

Cisco 803 Legacy DDR WITH DialerProfiles

by Ulvis In reply to Cisco 803 Legacy DDR WITH ...

I have not been able to follow up, but I reward TODD KIMBRELL the points anyway. Thanks.

Collapse -

Cisco 803 Legacy DDR WITH DialerProfiles

by Ulvis In reply to Cisco 803 Legacy DDR WITH ...

This question was closed by the author

Back to Networks Forum
4 total posts (Page 1 of 1)  

Related Discussions

Related Forums