Question

Locked

Cisco 871w Upgrading IOS and Memory, stuck in ROMMON

By mbevington ·
I bought the advanced ip services IOS - and I have to upgrade the memory to support the image.
So I stuck in a 32 meg flash, and now I get ROMMON. I tried 0x2101 + 0x2102, but I don't get router# or router(boot) - just ROMMON. I wanted to do the TFTP download, but after setting the IP, Subnet, and Gateway in ROMMON I can't ping the router, so the TFTP server can't communicate it just times out. Disn't know which port to use - so I used them all (direct pc to router with crossover cable, and thru a linksys router with cat6) just times out. Does that mean all the interfaces except the console port are disabled under ROMMON? What do I do? I'm still fairly new to Cisco, am I missing something? Driving me crazy.
Thanks a million!

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums