Question

Locked

cisco easy vpn setup! any advice ?!

By R_O_L_A_N_D ·
Hi All,

i'm in the process of setting up a second easy vpn server for remote clients to access my lan using cisco vpn client.(i already have one setup to one of my other interfaces )
i've managed to get clients to connect to my public ip through vpn and authenticate..
but they cannot access my lan..
they cannot ping,rdp,telnet or any sort of communication with my inside lan..
any advice? i'm sure ive missed something with my configuration and ill appreciate if you could point it out
here's the relevant config i've issued:

aaa authorization network sdm_vpn_group_ml_2 local
aaa authentication login sdm_vpn_xauth_ml_2 local
ip local pool SDM_POOL_1 172.16.1.1 172.16.1.100
crypto ipsec transform-set cyberia esp-md5-hmac esp-3des
mode tunnel
exit
crypto dynamic-map SDM_DYNMAP_1 1
set transform-set cyberia
reverse-route
exit
crypto map SDM_CMAP_1 65535 ipsec-isakmp dynamic SDM_DYNMAP_1
interface FastEthernet0/0
no crypto map
crypto map SDM_CMAP_1
exit
crypto map SDM_CMAP_1 isakmp authorization list sdm_vpn_group_ml_2
crypto map SDM_CMAP_1 client authentication list sdm_vpn_xauth_ml_2
crypto map SDM_CMAP_1 client configuration address respond
crypto isakmp client configuration group cyberia
key 0 *******
pool SDM_POOL_1
netmask 255.255.255.0
exit
crypto isakmp policy 1
authentication pre-share
encr 3des
hash md5
group 2
lifetime 86400
exit
crypto isakmp xauth timeout 15

This conversation is currently closed to new comments.

0 total posts (Page 1 of 1)  
Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Networks Forum
0 total posts (Page 1 of 1)  

Related Discussions

Related Forums