General discussion

Locked

Cisco IP forwarding

By bimsha ·
Hi I am tring to host my own website on my RH server. I am connected a f/t1 with a cisco 1600 router with a t1 wic.

How do I setup my router to forward any request from i the internet (wan)64.81.181.234) to ( lan 192.168.5.126)port80

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Cisco IP forwarding

by RCOM In reply to Cisco IP forwarding

Use the "ip nat inside source static" command to set it up.

ip nat inside source static tcp 192.168.5.216 80 64.81.181.234


"ip nat inside source"

Translates the source of IP packets that are traveling inside to outside.

Translates the destination of the IP packets that are traveling outside to inside.
___________________________________________

"ip nat outside source"

Translates the source of the IP packets that are traveling outside to inside.

Translates the destination of the IP packets that are traveling inside to outside.

http://www.cisco.com/en/US/tech/tk648/tk361/technologies_tech_note09186a0080094e77.shtml#topic2

Back to Hardware Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums