I am a networking student who is trying to set up a home cisco router/switch setup. I currently have a Cisco 2610 with two ethernets and a cisco 2924 switch. Currently so far the only think i have hooked up is one ethernet card to the switch on port1. I also have a WAP i need to connect to the setup so both wireless connections and wired connections can see the internet.
Looking for a little help.
Here is my show run for both devices.
Switch
Building configuration…
Current configuration:
!
version 12.0
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname MOBOSWITCH
!
enable secret 5 $1$X13Y$4VQbK/gzaLgiZ/wava6zv1
!
!
!
!
!
!
ip subnet-zero
!
!
!
interface FastEthernet0/1
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
!
interface FastEthernet0/6
!
interface FastEthernet0/7
!
interface FastEthernet0/8
!
interface FastEthernet0/9
!
interface FastEthernet0/10
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
!
interface FastEthernet0/16
!
interface FastEthernet0/17
!
interface FastEthernet0/18
!
interface FastEthernet0/19
!
interface FastEthernet0/20
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface VLAN1
ip address 12.1.1.1 255.255.255.0
no ip directed-broadcast
no ip route-cache
!
ip default-gateway 12.1.1.1
snmp-server engineID local 000000090200000653AC3640
snmp-server community private RW
snmp-server community public RO
!
line con 0
transport input none
stopbits 1
line vty 0 4
password MOBONETW
login
line vty 5 15
password MOBONETW
login
!
end
Here is the router
Building configuration…
Current configuration : 505 bytes
!
version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname MOBOROUTER
!
enable secret 5 $1$e2t5$jKiUl5Tq5GoPZZnri6D8l/
enable password password
!
!
!
!
!
ip subnet-zero
no ip routing
no ip finger
!
!
!
!
interface Ethernet0/0
ip address 10.1.1.1 255.0.0.0
no ip route-cache
no ip mroute-cache
!
ip classless
no ip http server
!
!
line con 0
transport input none
line aux 0
line vty 0 4
password password
login
!
no scheduler allocate
end
