compaq nx7010 not initializing

By irvinemakoni ·
I have a compaq nx7010, if i switch it on it not loading the bios. its not even showing on the screen. the harddrive indicator stays on and nothing will be happening. what could be the problem, my memory is fine.

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

Sounds like a

by OH Smeg Moderator In reply to compaq nx7010 not initial ...

M'Board Failure here take it to a Authorized HP Repair Faculty for a guestimate for repairs or look at replacing the failed NB.


Collapse -

just as a though

by brian In reply to compaq nx7010 not initial ...

it could be as col said, a mb failure, i have ran into a bad hard drive causing this issue on boot in dell laptops before. as a quick test, pull the hdd out and see if it boots, if so, it could be the hdd or the hdd controller on the board...the only way to test further if this is the case is to replace the drive with a known good drive and try to boot. if it boots, drive was bad, if it gives same symptom board is bad.

Related Discussions

Related Forums