Question Locked

Computer is on but no display on the monitor.

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I powered up my pc and there was no usual short beep sound and now there was no display on the screen. message saying "monitor is ok check your signal cable" I did change the monitor just to check the signal cable but still no display. I repalced the RAM but nothing happens, I even unplug the HDD but I still couldn't get any where. I became suspected of the VGA card but please I need some assistance on this problem.

5 replies

by neutro02

One of my computer has an ati x800 and when I install the driver on windows xp 32b, it "loose" the signal.

by paul

Sounds like a bios problem or like you suggest a graphics card problem (is it built in?). I would suggest first resetting your Bios to it's default setting. It seems you know the way around the computer so you should be able to locate the reset pins on your motherboard (check the manual). If you dont have a manual there maybe an online one at the motherboards wesbite.
If it still doesnt work after that I would probably get an old graphics card if I had one and use that so I could at least get a picture to see what the motherboards doing during boot. Of course if the old card doesnt work then it may be a problem with the M/B.

by oh smeg

If this is a New build and has never worked it's possible that the Video Card is incompatible with the M'Board and this is preventing the unit starting.

If this is an existing computer and has just stopped working the obvious thing is that the Video Card has at the very least moved slightly of if you have had rain recently like overnight the dust inside the case has got a bit damp and allow Cross Tracking of the signals. The solution here is to lift out the Video Card and re-seat it to see if that provides any solution. Often just doing this can fix a problem but while you have the Video Card out of the socket if it has a Fan on it check it for free movement as the fans can seize up and cause problems.

Col

by butch_firefox

hello you...first i would like to ask what is the color of the led at the power button of your monitor...if it becomes orange,then possible it is the video card who is the culprit..try another monitor...if it not works and the same problem then you can conclude that it is the video card that is faulty...2nd, i would like to ask if you are using a built-in or add-on video card..if you are using the add-on, try removing it and connect your display to a built-n vcard...if it works, then it might possible that your add-on vcard is defective or not compatible...if it still doesn't work , try purchasing a new vcard that is raelly compatible with ur mobo..if it really does'nt work try adjusting the jumper of the switch in your mobo if it has..refer to the manual...might be it was the overclocking?if it doesn't , might be your motherboard...hope it helps...U
if the video card you are using right now is built or additional.

This discussion is closed to new replies.