General discussion

  • Creator
    Topic
  • #2313659

    Connecting NEC LT157 projector

    Locked

    by sue t ·

    How do I connect this projector to a PC that has onboard video on the motherboard so that I can have both the monitor and the projector connected at the same time and the projector will also display whatever is on the monitor screen? The computer is running Windows 98se.

All Comments

  • Author
    Replies
    • #3395836

      Connecting NEC LT157 projector

      by saihib ·

      In reply to Connecting NEC LT157 projector

      In order to do that you need a projector that has a RGB out port. The LT157 only has one input port. In other words, there’s no way you are going to be able to make this happen using that projector.

      • #3395832

        Connecting NEC LT157 projector

        by saihib ·

        In reply to Connecting NEC LT157 projector

        There is a possible solution, however. Get yourself a VGA splitter box. Then you can output the signal from the computer, through the box, and connect your monitor and the projector to the box.

      • #3397123

        Connecting NEC LT157 projector

        by sue t ·

        In reply to Connecting NEC LT157 projector

        Thank you. I hadn’t thought of a splitter box and while looking for those I found that I can get a splitter cable that will do the same job but for a lot less money.

    • #3397122

      Connecting NEC LT157 projector

      by sue t ·

      In reply to Connecting NEC LT157 projector

      This question was closed by the author

Viewing 1 reply thread