Question

Locked

Connecting voip on a wireless WAN network

By rcouture ·
My ISP put a receiver on the roof of my house and from there an RJ45 jack into the house. I have an Intellinet wireless broadband router (model 523431) and Vonage provided me with a D-Link wireless router (MODEL VWR-VC). I am not sure what the proper install for the voip and the vonage support is useless for my situation.
The Intellinet WAN port is plugged into the jack my ISP installed and is set up for DHCP. My laptop (Dell Inspiron 2650) with XP Pro (sp2). The settings are as follows:

Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.

C:\Documents and Settings\Randall Couture>ipconfig /all

Windows IP Configuration

Host Name . . . . . . . . . . . . : laptop
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Unknown
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : local

Ethernet adapter RCWireless:

Connection-specific DNS Suffix . : local
Description . . . . . . . . . . . : Compact Wireless-G USB Adapter
Physical Address. . . . . . . . . : 00-1C-10-61-E1-57
Dhcp Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
IP Address. . . . . . . . . . . . : 192.168.10.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.10.1
DHCP Server . . . . . . . . . . . : 192.168.10.1
DNS Servers . . . . . . . . . . . : 10.0.0.1
Lease Obtained. . . . . . . . . . : January 5, 2008 1:57:37 PM
Lease Expires . . . . . . . . . . : January 15, 2008 1:57:37 PM

Ethernet adapter Local Area Connection:

Media State . . . . . . . . . . . : Media disconnected
Description . . . . . . . . . . . : 3Com 3C920 Integrated Fast Ethernet
Controller (3C905C-TX Compatible)
Physical Address. . . . . . . . . : 00-08-74-E9-3B-A7

I can't open the Vonage device menu when I type the default http://192.168.15.1 to make any changes to the settings. As well it does not have an IP address. The phone works but has alot of breakup and static. If anyone knows the correct way I should set this up I would be very greatful for the info.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Your subnet is 192.168.10.0, yet you're targeting 192.168.15.0 subnet which

by ManiacMan In reply to Connecting voip on a wire ...

does not exist and is a completely different subnet altogether based on your subnet mask of 255.255.255.0. You need to access your device by typing in 192.168.10.1, because you're on the 10 subnet, not the 15 subnet.

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums