Question

Locked

copy flash tftp timed out

By vijaykvrma ·
Hi ,
I have to copy Cisco 1941 Flash image to TFTP.But,when trying to copy ,copying session timed out everytime exactly after copying same amount of flash.
I able to copy other flash with same setting..but not C1900..........bin file which is of approx. 50MB
Below is the capture of the process.
Please suggest the solution,
Thanks in advance.
Vijay

s

Cisco IOS Software, C1900 Software (C1900-UNIVERSALK9-M), Version 15.1(4)M4, RELEASE SOFTWARE (fc1)

<OUTPUT CUT>

System image file is "flash0:c1900-universalk9-mz.SPA.151-4.M4.bin"
Last reload type: Normal Reload

<OUTPUT CUT>

250880K bytes of ATA System CompactFlash 0 (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device# PID SN
-------------------------------------------------
*0 CISCO1941/K9 XXXXXXXX



Technology Package License Information for Module:'c1900'

-----------------------------------------------------------------
Technology Technology-package Technology-package
Current Type Next reboot
------------------------------------------------------------------
ipbase ipbasek9 Permanent ipbasek9
security None None None
data datak9 Permanent datak9

Configuration register is 0x2102

Router#

Router#
Router#sh flash
Router#sh flash
-#- --length-- -----date/time------ path
1 55088360 Aug 6 2012 18:25:32 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin
2 2903 Aug 6 2012 18:35:14 +00:00 cpconfig-19xx.cfg
3 3000320 Aug 6 2012 18:35:30 +00:00 cpexpress.tar
4 1038 Aug 6 2012 18:35:40 +00:00 home.shtml
5 122880 Aug 6 2012 18:35:50 +00:00 home.tar
6 1697952 Aug 6 2012 18:36:04 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
7 415956 Aug 6 2012 18:36:20 +00:00 sslclient-win-1.1.4.176.pkg

196145152 bytes available (60342272 bytes used)

Router#


Router#dir
Directory of flash0

1 -rw- 55088360 Aug 6 2012 18:25:32 +00:00 c1900-universalk9-mz.SPA.151-4.M4.bin
2 -rw- 2903 Aug 6 2012 18:35:14 +00:00 cpconfig-19xx.cfg
3 -rw- 3000320 Aug 6 2012 18:35:30 +00:00 cpexpress.tar
4 -rw- 1038 Aug 6 2012 18:35:40 +00:00 home.shtml
5 -rw- 122880 Aug 6 2012 18:35:50 +00:00 home.tar
6 -rw- 1697952 Aug 6 2012 18:36:04 +00:00 securedesktop-ios-3.1.1.45-k9.pkg
7 -rw- 415956 Aug 6 2012 18:36:20 +00:00 sslclient-win-1.1.4.176.pkg

256487424 bytes total (196145152 bytes free)
Router#
Router#
Router#
Jun 5 05:39:13.552: %LINK-3-UPDOWN: Interface GigabitEthernet0/0, changed state to up
Jun 5 05:39:14.552: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0/0, changed state to up
Router#
Router#
Router#
Router#
Router#ping 10.10.10.7
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 10.10.10.7, timeout is 2 seconds:
.!!!!
Success rate is 80 percent (4/5), round-trip min/avg/max = 1/1/1 ms
Router#
Router#copy flash: tftp:
Source filename []? c1900-universalk9-mz.SPA.151-4.M4.bin
Address or name of remote host []? 10.10.10.7
Destination filename [c1900-universalk9-mz.SPA.151-4.M4.bin]? c1900-universalk9-mz.SPA.151-4.M4.bin
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!.....
%Error writing tftp://10.10.10.7/c1900-universalk9-mz.SPA.151-4.M4.bin (Timed out).....
Router#
Router#


Router con0 is now available


Press RETURN to get started.

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums