Question

  • Creator
    Topic
  • #2149870

    CrashDump Help

    Locked

    by botsuka ·

    I am running Win2K Pro. It is a specific application that was just recently installed, when ran causes a BSOD and reboots. I have uninstalled and reinstalled different versions of the software but to no avail.

    BugCheck 1E, {80000003, 8045bc8f, 2, ee0435a0}

    *** ERROR: Module load completed but symbols could not be loaded for PcCGoCls.sys
    Probably caused by : PcCGoCls.sys ( PcCGoCls+ef2 )

    Followup: MachineOwner
    ———

    kd> !analyze -v
    *******************************************************************************
    * *
    * Bugcheck Analysis *
    * *
    *******************************************************************************

    KMODE_EXCEPTION_NOT_HANDLED (1e)
    This is a very common bugcheck. Usually the exception address pinpoints
    the driver/function that caused the problem. Always note this address
    as well as the link date of the driver/image that contains this address.
    Arguments:
    Arg1: 80000003, The exception code that was not handled
    Arg2: 8045bc8f, The address that the exception occurred at
    Arg3: 00000002, Parameter 0 of the exception
    Arg4: ee0435a0, Parameter 1 of the exception

    Debugging Details:
    ——————

    EXCEPTION_CODE: (HRESULT) 0x80000003 (2147483651) – One or more arguments are invalid

    FAULTING_IP:
    nt!DebugService+f
    8045bc8f cc int 3

    EXCEPTION_PARAMETER1: 00000002

    EXCEPTION_PARAMETER2: ee0435a0

    CUSTOMER_CRASH_COUNT: 3

    DEFAULT_BUCKET_ID: INTEL_CPU_MICROCODE_ZERO

    BUGCHECK_STR: 0x1E

    PROCESS_NAME: System

    EXCEPTION_RECORD: ee0434b0 — (.exr 0xffffffffee0434b0)
    ExceptionAddress: 8045bc8f (nt!DebugService+0x0000000f)
    ExceptionCode: 80000003 (Break instruction exception)
    ExceptionFlags: 00000000
    NumberParameters: 3
    Parameter[0]: 00000002
    Parameter[1]: ee0435a0
    Parameter[2]: ee0435a8

    CONTEXT: ee043108 — (.cxr 0xffffffffee043108)
    eax=00000002 ebx=811c56e8 ecx=ee0435a0 edx=ee0435a8 esi=c0000001 edi=8045983e
    eip=8045bc8f esp=ee043578 ebp=ee04357c iopl=0 nv up ei pl nz na po nc
    cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00000202
    nt!DebugService+0xf:
    8045bc8f cc int 3
    Resetting default scope

    LAST_CONTROL_TRANSFER: from 8045bc6b to 8045bc8f

    ASSERT_DATA: slot<2

    ASSERT_FILE_LOCATION: e:\work\ntdev\pccardgo\class\pccgocls.c at Line 621

    STACK_TEXT:
    ee04357c 8045bc6b 00000002 ee0435a0 ee0435a8 nt!DebugService+0xf
    ee04358c 804556aa ee0435a0 ee0435a8 ee336000 nt!DebugPrompt+0xf
    ee0435b0 804598b3 80459800 ee043896 00000002 nt!DbgPrompt+0x38
    ee043898 edfd0ef2 edfd0940 edfd0918 0000026d nt!RtlAssert+0x50
    ee043c54 edfd076d 811c5ebc 811e3e7a 812b8830 PcCGoCls+0xef2
    ee043c78 edfd6d4c 812b8830 00000000 e273139a PcCGoCls+0x76d
    ee043c90 804ad580 812b8830 811c8000 bfbecd08 PcCGoCls+0x6d4c
    ee043d58 804ad7c1 000000f0 811c8000 bfbecd08 nt!IopLoadDriver+0x672
    ee043d78 80416bfe bfbecd08 00000000 00000000 nt!IopLoadUnloadDriver+0x3f
    ee043da8 80454ab6 bfbecd08 00000000 00000000 nt!ExpWorkerThread+0xae
    ee043ddc 804692b2 80416b50 00000001 00000000 nt!PspSystemThreadStartup+0x54
    00000000 00000000 00000000 00000000 00000000 nt!KiThreadStartup+0x16

    FOLLOWUP_IP:
    PcCGoCls+ef2
    edfd0ef2 8b45f0 mov eax,dword ptr [ebp-10h]

    SYMBOL_STACK_INDEX: 4

    SYMBOL_NAME: PcCGoCls+ef2

    FOLLOWUP_NAME: MachineOwner

    MODULE_NAME: PcCGoCls

    IMAGE_NAME: PcCGoCls.sys

    DEBUG_FLR_IMAGE_TIMESTAMP: 417e5718

    STACK_COMMAND: .cxr 0xffffffffee043108 ; kb

    FAILURE_BUCKET_ID: 0x1E_PcCGoCls+ef2

    BUCKET_ID: 0x1E_PcCGoCls+ef2

    Followup: MachineOwner
    ---------

All Answers

  • Author
    Replies
    • #2913036

      Clarifications

      by botsuka ·

      In reply to CrashDump Help

      Clarifications

    • #2912454

      Any truth in this

      by rob miners ·

      In reply to CrashDump Help

      The pccgocls.sys driver does not not support “hot-swap” in Windows 2000/XP. This means that the PCMCIA card must be inserted before running CCP software (or any other software that uses this driver), and the card may not be ejected until this driver is manually stopped in the Device Manager. Failing to stop the driver when the card is ejected could cause a fatal execption to occur.

Viewing 1 reply thread