current bios and setting

Start the system from a cold boot,upon seeing the Post startup screen,press the pause key,look in the upper left corner,it will show the Bios manufacturer and the date released
To check the settings,boot computer press the key designated to open the CMOS panel upon startup,you can view the configuration

If you do not see the POST screen with the BIOS revision, and the message for how to enter setup, it is because of security features on your motherboard.

There are a few mother boards out there where you have to set a jumper to access the BIOS screen and settings.

There are also some very old PCs that required a special boot floppy to enter BIOS settings.

The bios revision shown, is the BIOS that is installed on the computer. To check for newer versions, you need to contact the company that made the computer or mother board.

to get the bois and settings cheque the mother board manaul for all settings this is the bible for all bois setting.unplug the keyboard.this will put a error on the startup screen and give you hands free to write down the bois string.if no manaul and you do not no the mother board manufacturer.there is a web site to find them by the bois string.this is www. motherboard.org/.

to get the bois and settings cheque the mother board manaul for all settings this is the bible for all bois setting.unplug the keyboard.this will put a error on the startup screen and give you hands free to write down the bois string.if no manaul and you do not no the mother board manufacturer.there is a web site to find them by the bois string.this is www. motherboard.org/.

This question was closed by the author