Question Locked

d grading external sata drive to my ide drive installed in my laptop

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i am using IDE running hard drive on my laptop.
i want to connect external sata drive so can i change this external sata drive to IDE drive or any software to d grade it to IDE. help me out

4 replies

by Former member

Why?.
Because they have different connectors/attachments.
But you can copy the contents (files, music, etc), of the drive to one another.
If your laptop can ONLY handle "IDE" then you CAN NOT change the connector inside, unless you are very good with a soldering iron and it has the slot ready for "SATA".

Please post back if you have any more problems or questions.

by thechas

Assuming that your laptop has a USB 2.0 port, there is no problem connecting an external SATA drive.

Depending on the OS and service pack level on the laptop, you may not even need drivers.

If you are looking to back up the files on the laptop, the external drive and any of a number of software backup packages is all you need.

If you want / need to replace the IDE drive in the laptop, you will need a 2.5" notebook IDE drive.

Chas

by oh smeg

If you want to replace the IDE Drive with a SATA Drive here and your NB supports this possibility you can not clone the IDE Drive to the SATA Drive as it will lack the SATA Driver that is required by most NB's to allow the SATA Drive to Boot the OS. In a case like this you will get a Error Message of no HDD Found or something about invalid Media present.

If your aim here is to replace the SATA Drive with a IDE that's not a problem provided that the NB in question has the space and connections for a IDE Drive inside it. But moving from IDE to SATA isn't possible with most hardware.

Col

This discussion is closed to new replies.