Question

Locked

Dell Dim 4300s ram upgrade

By ksgmitchell ·
I upgraded the ram on my Dell Dim 4300s from 133mhz to 1gb (2 512mb). When I turn the PC on all it does is beep and the monitor shows no signal.Software is windows XP

I think it beeps 3 or 4 times then repeats

Thanks 4 for help, This is the PC my special ed students use
Green

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Documentation shows an issue

by IC-IT In reply to Dell Dim 4300s ram upgrad ...

The manual claims you can use a 512MB (133MHz) module, two slots available, but a max of 512MB.
Try removing one module (also verify that the other is in the slot properly.
The beep code indicates memory problem.

http://support.dell.com/support/edocs/systems/dim4300s/codes.htm#1101572

Collapse -

Great minds think alike...see my post below.

by robo_dev In reply to Documentation shows an is ...
Collapse -

That PC can only take 512, not 1 gig

by robo_dev In reply to Dell Dim 4300s ram upgrad ...

So it should work fine with one memory stick.


http://support.dell.com/support/edocs/systems/dim4300/specs.htm#1102880

Architecture
SDRAM PC133
Memory capacities
64-, 128-, 256-, and 512-MB non-ECC or ECC SDRAM

Maximum memory
512 MB

Memory type
PC133 (non-ECC or ECC)

Collapse -

1 gig with 4300S

by nhcs In reply to Dell Dim 4300s ram upgrad ...

I don't know how I ended up doing this or what made me think it would work, but I have 1gig of RAM in my 4300s and it has been running happily this way for a few years.

FWIW!

Back to Software Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums