Windows Forum

Ask something
Discussion Locked

Device conflict code

0 helpful
3 replies

by overtimeagain

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a win2k pro PC that won't recognize a 1 gb Jaz drive ext. Even though the correct driver is loaded, Device Manager states "This device could not start. (Code 10)." What's code 10?

3 replies

by fenaikh

Hi
this is a apart of MS article.
good luck

Mohamed
Explanation of Error Codes Generated by Device Manager

http://support.microsoft.com/support/kb/articles/Q125/1/74.asp

Code 10
If the device has a "FailReasonString" value in its hardware key, that string is displayed as the error message. The driver or enumerator places this registry string value there. If there is no "FailReasonString" in the hardware key, the following generic error message is displayed:

This device is either not present, not working properly, or does not have all the drivers installed. (Code 10)

Try upgrading the device drivers for this device.

Solution button: Update Driver

To resolve this error code, make sure the device is connected to the computer correctly. For example, make sure all cables are plugged in fully and that all adapter cards are properly seated. Follow the suggested solution button and update the device driver. It may be possible to remove the device and redetect it using the Add New Hardware wizard.

This discussion is closed to new replies.