Windows Forum

Ask something
Discussion Locked

DHCP and Multiple Subnets

0 helpful
3 replies

by bmcneil2k

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

First time configurating DHCP , I am a CISCO Engineer and have configured my switch VLAN's which works fine. I now would like to configure a DHCP server and have it provide and address per VLAN / subnet,
Steps I'm looking for steps, I have configured a superscope with all subnets, and activated under the domain. When a client send its request, I get the first address of a subnet of which the clients port does not reside.

Client is in VLAN 12 configured Sunet is 192.168.12.0

Client receives 192.168.1.11

How do I configure a DHCP server for mulitiple Subnetted VLANS.

3 replies

by bmcneil2k

Thanks But No this document does not tell me why my DHCP does not push IP informaton pe VLAN segment.
I had one station in VLAN 12 and move to VLAN 16 and I reveice still Same IP subnet info from 12, 192.168.12.0 and not the 16 subnet 192.168.16.0

This discussion is closed to new replies.