General discussion

  • Creator
    Topic
  • #2344018

    DHCP Server

    Locked

    by cpu_ja ·

    I run nt4 sp6.1. I have wintoute as proxy server and I also have 3 hp jetdirect print servers. all of a sudden my tcp/ip protocol does not seem to be working. meaning I can’t ping the server although I can still work using netbeiu. winroute works fine. what could be the matter

All Comments

  • Author
    Replies
    • #3690632

      DHCP Server

      by stillatit ·

      In reply to DHCP Server

      How do your stations get addresses? If you are using a DHCP server, check that it has not run out of addresses, and that all of the addresses it gives out are on the same subnet.

      If you recently made any changes, check everything, including subnet mask and default gateway.

      If winroute is also doing DHCP, check its address database the same way.

      On each station, use ipconfig (NT) or winipcfg to check what IP address the station has, and how it got it.

      Good luck.

      • #3691405

        DHCP Server

        by cpu_ja ·

        In reply to DHCP Server

        Poster rated this answer

    • #3691912

      DHCP Server

      by hd.rudolph ·

      In reply to DHCP Server

      Sometimes we had the same trouble. The only way out i know is to remove all NICs and everything else concerning your network. Reinstall it and everything works fine.

      hd

      • #3691406

        DHCP Server

        by cpu_ja ·

        In reply to DHCP Server

        The proble,was winroute. it had to do with NAT on the NIC interface setting

    • #3691404

      DHCP Server

      by cpu_ja ·

      In reply to DHCP Server

      This question was closed by the author

Viewing 2 reply threads