Dialup Server
A windows 2000 server has 3 internal modems, 2 of
them can not be accessed, neither port for diagonistics. How can I the modems to be recoginized? I tried to reinstall the drivers but it no longers detects them.
Windows Forum
A windows 2000 server has 3 internal modems, 2 of
them can not be accessed, neither port for diagonistics. How can I the modems to be recoginized? I tried to reinstall the drivers but it no longers detects them.
by supz
Depending on your motherboard, if you have the manual, there might be a link on how to update your diagnostics....or a better idea, I believe...would be:
1. turn off your pc
2. remove the modems manually from their slots.
3. plug the undetectedmodems back in, but switch their positions (if one was plugged into IDE slot 2 plug it into where the other one was, lets say 3, and same process for the other)...This should detect new hardware when you start up your computer. A better idea would probably be to install one at a time. Make sure you have the Windows2000 cd for installation and if you think the modems will need a disk, have that handy too..Good luck
This discussion is closed to new replies.
Sort by Trending