General discussion

  • Creator
    Topic
  • #2300952

    disconnect from terminal service

    Locked

    by tsassist ·

    I am running terminal service on a Windows 2000 domain server. I have a promblem with frequent disconnects from the server at two location. How can I determine what is wrong?

All Comments

  • Author
    Replies
    • #3540979

      disconnect from terminal service

      by degiewarlord ·

      In reply to disconnect from terminal service

      If you are using ISA server setup a bandwidth rule. Assign bandwidth to this connection. Also check the timeout settings on the terminal server connection settings.
      If this is over a slow wan link see that your routers also have assigned bandwidthsettings for the type of traffic in the IP stack according to the protocol packages.
      A server of mine dropped all connections due to the the raid settings in that the processor could not handle the load of the disk systems in place if the file traffic to the server and network usage became too high. In this senario I installed a second net card and did load balancing, switched from raid 1 to raid 5 and it is up. Hpe it helps

    • #3541877

      disconnect from terminal service

      by craig it mangaer ·

      In reply to disconnect from terminal service

      If this is for certain users check the user settings for terminal server. This can be set to automatically disconnect after a time period. If you don’t find a problem with the hardware settings as suggested above that would be the next place to look.

    • #3374740

      disconnect from terminal service

      by tsassist ·

      In reply to disconnect from terminal service

      This question was auto closed due to inactivity

Viewing 2 reply threads