Windows Forum

Ask something
Discussion Locked

Display Problem....

0 helpful
10 replies

by don_knl

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello sir ,

To day i got a problem. I had a pc which having the operating system windows NT(Workstation).when i am not in home,some body change the display setting which is not support to my graphics card.
When i start a system then it will nothing to visible accept line.it will display all the things but it's not properly visible .so nochance to change display setting to proper way.

I know how solve this prob but it having another problem that was i remove time to dilay option at startup to choose operating system from system properties.

So please sole that.

10 replies

by vjohnmoses

hi ,
When your system starts select "WINT4 WORKSTATION(VGA MODE) ,(there will be two mode select the second mode) . the system will boot without loading the disply drivers , go to display properties and change the resolution to the minmum restart the system , after system restarts change the resolution to which your moniter supports

getback if not solved

bye

john moses vinukonda

by gigelul

1. Try to use space key at boot sequence and chose "last know good configuration"
2. Make a bottable diskette for NT
3. Put your HDD in other computer and edit/change boot.ini from your HDD

by gigelul

I make a test with first point:
After succesful pressing the space key, use F3 key to exit and you will receive the screen where you can chose "VGA mode"

by gigelul

NT boot diskette:
Format a floppy on an NT machine and then copy files:
NTDETECT, NTLDR and BOOT.ini
Modify BOOT.ini according with your HDD partitions and OS installed partition.

by itadmin-dquick

just hold down any arrow key after your bios finises loading. The selection things will fly, but then you can select the proper start selection

This discussion is closed to new replies.