17 replies
by otl
Somplest way is to fdisk/format/reload the operating system, no problems from NTFS to Fat 32.
And you have a clean install .
by bjone186
by thechas
1. Format the hard drive.
2. Delete any partition set as NTSF. W98 needs Fat32 partitions.
Reset partitons as needed, and format.
3. Boot from W98 startup disk, and Install W98.
If the drive is NTSF, there are no shortcuts.
If the drive is FAT32, you can try deleteing ALL files in the root, and the Windows folders.
You will need to re-install ALL applications.
Backup ALL data files before you begin.
Chas
by bjone186
by cg it
by cg it
Then there is the pesky little thing about going from New Technology File system to File Allocation Table 32 without any serious data loss or corruption problems.
again, answers #1 & #2 are probably your best bet. That may not be what you want to hear, but, it may be the only choice if you don't want Windows XP.
by cg it
by bjone186
by dmiles
Uninstall Windows XP,and do a clean install of Windows 98
The file systems are different and therefore the XP files need to be completed deleted
by bjone186
by thechas
I see that you are rejecting all answers without comment.
Please tell us why our answers are not acceptable so that we can provide you the additional detail required.
As has been stated, the only "safe" way to remove Windows XP and install Windows 98 is to format the drive, and start over.
There is no 'simple' method to "downgrade" XP into Windows 98.
Chas
by bjone186
by timwalsh
by bjone186
by chrisrlg
by bjone186
by bjone186
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending