Discussion Locked

Drive 0 using letter F

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

After re-installing 2000 new. My hard driver where 2000 is installed is using a letter F.

I go to Disk manager and tried to change to drive C. I get a "Cannot modify the drive letter of your system or boot vol"

I'm sure this happened because Iwas not aware of a plugged in controller card that a second h.d. was using when installing win2000. Does anyone know a way that I can change it to C without tons of work or re-install ?

8 replies

by maxwell edison

Start - Settings - Control Panel - Administrative Tools - Computer Management - Disk Management.

On the right side of the window are the drives installed in the computer. Right Click on the device - select Change Drive Letter and Path - select the Edit Button - a new window will appear and you'll see Assign a Drive Letter.

There ya' go.

by maxwell edison

Since I read the question AGAIN after I posted the answer, I see that you've already done this.

Therefore, I would suggest a couple of things.

First, you have to be logged on as administrator or a member of the Administrators group in order todo this.

If you are logged in as administrator, An error message may appear when you attempt to assign a letter to a volume, CD-ROM drive, or other removable media device, possibly because it is in use by a program in the system. If this happens,close the program accessing the volume or drive, and then click the Change Drive Letter and Path command again.

However, you cannot change the drive letter of the system volume or boot volume.

See this link for more info:

http://tinyurl.com/1tzk

by acattr

unless you want to modify every single registry entry, I would recommend you reinstall.

by odurasler

there's no simple way of changing the drive letter from F: to C:. A reinstall is the only way.

This discussion is closed to new replies.