General discussion

Locked

Drivers for Chips and Technologies 65545

By gibsonx1 ·
I have an NEC Versa 4050c using a Chips and Technologies video chip. I am using Windows 98 second edition. When Windows boots up, all of the icons on the desktop are dark blue. Also, anything that is "greyed" out is not visible at all. I don't have the original drivers and I am unsure of the exact drivers to use. I have downloaded just about every driver on their support page and at driverguide.com. The only driver that seems to work is the Chips and Technologies Super VGA driver but according to the documentation, I should be able to use one of the others.

This conversation is currently closed to new comments.

5 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Drivers for Chips and Technologies 65545

by SyscoKid In reply to Drivers for Chips and Tec ...

This may sound off the wall, but it may not be a video driver problem at all.

Try right-clicking on the desktop, click on Properties, click on the Appearance tab, and in the Scheme field select Windows standard, and see what happens.

Collapse -

Drivers for Chips and Technologies 65545

by gibsonx1 In reply to Drivers for Chips and Tec ...

That was the first suggestion from tech support but it didn't work.

Collapse -

Drivers for Chips and Technologies 65545

by spn In reply to Drivers for Chips and Tec ...

the driver you need is here
i hope
http://www.driverzone.com/dsp3.php3?id=288&cat=13&pass=chips
if not look abount the site or ill see whatn i can find?
SPiNner

Collapse -

Drivers for Chips and Technologies 65545

by gibsonx1 In reply to Drivers for Chips and Tec ...

I pretty much exhausted this site but thanks.

Collapse -

Drivers for Chips and Technologies 65545

by gibsonx1 In reply to Drivers for Chips and Tec ...

This question was closed by the author

Back to Hardware Forum
5 total posts (Page 1 of 1)  

Related Discussions

Related Forums