Question

Locked

DVD writer Samsung-TSST SH-S182D Writing/errornous burn/long time taken

By pgmadhav ·
Hi Everyone,
My DVD writer is Samsung TSST SH-S182D. Lately it has started writing erroneous DVDs.I am copying AVI files, some DIVx files on the DVD as DATA DVD in Nero. Now it starts writing normally but halfway it will stop or take long hours 9-10 hrs to write and then also give me disc full of errors.I am using good media to write, I have cleaned the lens using good quality lens cleaner also i have updated the firmware. What may be the problem? I am pasting one of the log.

Madhav
Padala
4C87-200M-3005-E10K-000X-X640-0800-4049-233A-**** (*)

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'E:\Program Files\Nero\Nero 7\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM

NT-SPTI used
Nero Version: 7.5.9.1
Internal Version: 7, 5, 9, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-S182D>Version: SB07 - HA 1 TA 0 - 7.5.9.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW SH-S182D>Version: SB07 - HA 1 TA 0 - 7.5.9.1
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD/DVDW SH-S182D atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3160211AS atapi Port 4 ID 0 DMA: On
CdRomPeripheral : BWVCVET 3KPI3OLUZ 1.03 arl8ipa0 Port 6 ID 0 DMA: Off
CdRomPeripheral : GLIJ YFCL6R4H2N8 3.5Z aecaumno Port 7 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW SH-S182D I: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2021MB (2070132kB)
Free physical memory: 1395MB (1429300kB)
Memory in use : 30 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

28.5.2009
ISO compilation
10:06:39 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL

10:06:39 PM #2 Text 0 File Isodoc.cpp, Line 6509
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

10:06:39 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3332
First writeable address = 0 (0x00000000)

10:06:39 PM #4 Text 0 File Burncd.cpp, Line 3451
Turn on Disc-At-Once, using DVD media

10:06:40 PM #5 Text 0 File DlgWaitCD.cpp, Line 306
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1923503 (427:26.53, 3756MB)

10:06:40 PM #6 Text 0 File DlgWaitCD.cpp, Line 318
Write in overburning mode: NO (enabled: CD)

10:06:40 PM #7 Text 0 File DlgWaitCD.cpp, Line 2903
Recorder: TSSTcorp CD/DVDW SH-S182D, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193

10:06:40 PM #8 Text 0 File DlgWaitCD.cpp, Line 490
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:06:40 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 821
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1923504 (1923504) = #1923504/427:26.54
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1923504 blocks
--------------------------------------------------------------

10:06:40 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1024
Prepare for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3939336192, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 1923504 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1923504 | 0 | 0x00
1923504 | lead-out | 1 | 0x41 | 0 | 0 | 0x00

10:06:40 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:06:40 PM #12 Phase 24 File dlgbrnst.cpp, Line 1746
Caching of files started

10:06:40 PM #13 Text 0 File Burncd.cpp, Line 4278
Cache writing successful.

10:06:40 PM #14 Phase 25 File dlgbrnst.cpp, Line 1746
Caching of files completed

10:06:40 PM #15 Phase 36 File dlgbrnst.cpp, Line 1746
Burn process started at 18x (24,930 KB/s)

10:06:42 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2743
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

10:06:42 PM #17 Text 0 File DVDR.cpp, Line 3058
Recording mode: Sequential Recording Mode for Multisession

10:06:42 PM #18 Text 0 File DVDR.cpp, Line 3214
Start write address at LBA 0
DVD high compatibility mode: Yes

10:06:42 PM #19 Text 0 File Cdrdrv.cpp, Line 9235
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGI 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

10:07:11 PM #20 Text 0 File Cdrdrv.cpp, Line 1293
22:07:11.203 - I: TSSTcorp CD/DVDW SH-S182D : Queue again later

10:17:49 PM #21 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 03 BC 60 00 00 20 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x2fee7a00: Len x10000
0xB6 D0 5B 3E 0A 26 37 01 89 2D 20 31 D1 E1 A8 C5
0x1B 2C 47 49 FE 1E 58 87 30 08 D7 F9 83 7F 72 1B
0x0F 4B 64 79 8F 02 35 9E B3 DB D9 98 63 80 81 2A

10:17:49 PM #22 CDR -1135 File Writer.cpp, Line 299
Write error
I: TSSTcorp CD/DVDW SH-S182D

10:17:50 PM #23 Text 0 File DVDR.cpp, Line 3434
EndDAO: Last written address was 244831

10:17:50 PM #24 Phase 133 File dlgbrnst.cpp, Line 1746
Writing short lead-out

10:35:40 PM #25 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 18x (24,930 KB/s)

10:35:40 PM #26 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:35:54 PM #27 Text 0 File Cdrdrv.cpp, Line 10472
DriveLocker: UnLockVolume completed

10:35:54 PM #28 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL


Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 3/8/2007 5:21:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.56a, size=43528 bytes, created 3/8/2007 5:21:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=5, 5, 2, 8, size=118576 bytes, created 5/15/2007 3:55:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=5, 5, 2, 8, size=37040 bytes, created 5/15/2007 3:55:36 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=5, 5, 2, 8, size=16304 bytes, created 5/15/2007 3:55:36 PM (InCD4 driver for win NT/2K/XP)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Bad drive?

by robo_dev In reply to DVD writer Samsung-TSST S ...

Download and burn to CD a linux distro such as Ubuntu. It has a DVD-burner application called Brasero.

Boot your PC with this Linux CD and see if DVD burning works correctly.

If it works correctly, then you have a software/driver problem.

If it does not, then your drive is faulty and needs to be replaced.

Collapse -

What speed are you attempting these burns at ? ...

by OldER Mycroft In reply to DVD writer Samsung-TSST S ...

Your Log has an entry thus:

10:35:40 PM #25 Phase 38 File dlgbrnst.cpp, Line 1746
Burn process failed at 18x (24,930 KB/s)


If this is your chosen speed, try a slower burn, preferably at least 12x or lower.

Also, what is the state of the HDD you are using for these burns? How is the fragmentation?

Any burn to DVD (particularly DATA burns made up of different media files all bunched together) requires the system to manufacture a temporary 'Burn Image' made up of all the files placed in one folder. This is then the source for reading from - to allow a steady flow of data to the laser head for burning at a similarly steady rate. Any interruption to this steady flow, requires that the entire disc surface rotates forward until the head is once again above the same area where the data flow was interrupted.

In this respect, the recording of data to a CD/DVD is totally different to that of a HDD - where data can be dropped anywhere on the data surface (thereby creating fragmented files).

If your HDD is too heavily fragmented, there may be insufficient contiguous free space for the system to create an unbroken (interruption-free) 'burn image' which in turn will create abnormally long burn sessions and the possibility of data corruption.

Or as has already been suggested, your optical drive may be defunct.

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums