General discussion

Locked

dynamic ip address

By mdirfan_sadath ·
iam using lucent adsl router .And the ip address is 192.168.0.250 (gateway).i want to do terminal servcies and remote connectivity.So how can i know my dynamic ip address.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Remote IP

by mikatrob In reply to dynamic ip address

goto http://www.grc.com
then look for link to shields up!

follow directions it will also let you know if your ports are wide open as well.

Collapse -

Very simple Dynamic ip detection

by kjd In reply to dynamic ip address

first be sure that you can connect to your machin from internet and can pass all your DSL firewalls.
normaly the ip will change if the DSL connection drops (enogh time to test)
after you sure every thing is ok. then the only problem is the dynamic IP go to www.dyndns.com and make a subscription (Free 100%) and down load the clints software from the list they offer (some are free) and install the clints in your machine it will monitor the current ADSl modem ip (the real IP not 192....)and that's it from any other device connected to internet arround the globe you type www.yourdynamicdomain.dyndns.com:and the port
nomber and you can find your machine. long prosses but you will enjoy the ADSl

Collapse -

by hirentank In reply to dynamic ip address

Hi,

To know your ip add. go to cmd mode, and type ipconfig/all at command prompt. You will see the complete details of ip along with default gateway, Dns server ip, physical add of the card etc.

Bye.

Back to IT Employment Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums